Table of Contents
Advertisement
Quick Links
Installation Guide
Thank you for purchasing our product.
This document provides important information about safe and proper
operations of this Switching Hub.
Please read the "Important Safety Instructions" on pages from 3 to 5.
Any problems or damage resulting from disassembly of this Switching Hub
by customers are not covered by the warranty.
2-12-7, Higashi-Shimbashi, Minato-ku, Tokyo Japan, 105-0021
©
Swtich-M48eG
Model No.
2019
PN28480K-TH
PN28480K-MY
PN28480K-ID
PN28480K-SG
I0716-10719
Printed in Japan
Advertisement
Table of Contents
Related Manuals for Panasonic Swtich-M48eG Series
Summary of Contents for Panasonic Swtich-M48eG Series
- Page 1 Swtich-M48eG Installation Guide PN28480K-TH Model No. PN28480K-MY PN28480K-ID PN28480K-SG Thank you for purchasing our product. This document provides important information about safe and proper operations of this Switching Hub. Please read the "Important Safety Instructions" on pages from 3 to 5. ...
-
Page 2: Table Of Contents
Contents Important Safety Instructions Basic Instructions for the Use of This Product 1 Product Outline 1.1 Features 1.2 Specifications 1.3 Accessories 1.4 Basic operation 2 Part Names and Functions 2.1 LED display change 3 Installation and Configuration 3.1 Mounting to rack 3.2 Configuration of IP address (BASIC) Troubleshooting... -
Page 3: Important Safety Instructions
Important Safety Instructions This chapter contains important safety instructions for preventing bodily injury and/or property damage. You are required to follow them. Severity of bodily injury and/or property damage, which could result from incorrect use of the Switching Hub, are explained below. WARNING This symbol indicates a potential hazard that could result in serious injury or death. - Page 4 WARNING Do not put the Switching Hub into fire. Deviation could lead to explosion and/or fire. Do not insert nor drop any foreign objects such as metal or readily combustible things into the inside through the openings, twisted pair ports, console ports, or SFP extension slots.
- Page 5 CAUTION This Switching Hub is to be periodically serviced in order to maintain its performance. Please choose a product administrator, and have them be sure to implement periodic maintenance. When doing maintenance, check the inspection chart that is posted on our website which has the requisite items listed on it. When using this Switching Hub to design systems, use it after applying ...
-
Page 6: Basic Instructions For The Use Of This Product
SFP extension slot, operation is not guaranteed. For the latest information about compatible SFP extension modules, check our website. 1. Please note that Panasonic shall not bear any liability whatsoever for any damages (this shall include lost earnings, lost opportunities, etc. but this is not restricted to these... -
Page 7: Product Outline
Product Outline Switch-M48eG is an Ethernet Switching Hub with management function having 44 ports of 10/100/1000BASE-T and 4 pairs 10/100/1000BASE-T ports and SFP extension slot, one of which is selectable. 1.1 Features Has wire-speed Layer 2 switching function. Has a loop detection function, which notifies when a loop occurs with the corresponding port LED and automatically shuts down the looped port. -
Page 8: Specifications
Product Outline 1.2 Specifications Interface Twisted pair port 1-48: RJ45 connector Transmitting and receiving network system IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T Energy Efficient Ethernet IEEE802.3az (LPI only) SFP extension slot port 45-48 Transmitting and receiving network system IEEE802.3z Note: Select either of RJ45 or SFP for use Console port: RJ45 connector RS-232C (ITU-TS V.24) Store and Forward method:... -
Page 9: Accessories
1.3 Accessories Please be sure to confirm the content. Please contact our distributor if any of the contents are insufficient. Quantity Installation Guide (this document) CD-ROM (PDF version of Operating Instructions) Mounting bracket (for 19-inch rack) Screw (for 19-inch rack) ... -
Page 10: Part Names And Functions
Part Names and Functions MAC Address label Power cord hook block Back panel Ground terminal Serial number label Power port Console port Front panel 10/100/1000BASE-T port SFP extension slot Magnified view on the next page Power port Connect the supplied power cord to this port and connect the other end into an electric outlet. - Page 11 Power LED Collision LED Status/ECO mode LED GIGA mode LED Speed modeLED DUPLEX mode LED Loop History mode LED LED DISPLAY CHANGE BUTTON PWR LED (Power) Green Light : Power is ON. : Power is OFF. ANY/COL. LED (Collision) Orange Light : During half-duplex operation, packet collision is occurring in either port.
- Page 12 Part Names and Functions Port LED of 1–48 indicates each mode in the following way: Port LED Display mode Behavior Description Green Light Link is established. STATUS/ECO Green Blink Transmitting and receiving data. No device connected. Green Light Link is established at 1000 Mbps. GIGA Link is established at 100 Mbps or 10 Mbps, or no device is connected.
-
Page 13: Led Display Change
2.1 LED display change How to switch the display using the LED DISPLAY CHANGE BUTTON LED DISPLAY CHANGE BUTTON Using "LED DISPLAY CHANGE BUTTON" on the front panel, you can switch the following operations: indication of a connection status with a connected terminal (Status mode), indication of communication speed at 1000 Mbps (GIGA mode), indication of communication speed at 100 Mbps or 10 Mbps (Speed mode), indication of transmission mode of full-duplex or half-duplex (DUPLEX mode), indication of a... - Page 14 Part Names and Functions Switch two types of Base modes and their LEDs in the following way: When Base mode is Status mode (factory default setting) Press "LED DISPLAY CHANGE BUTTON" manually. Automatic Boot Automatically returns to Base mode after 1 minute. Status mode DUPLEX Loop History...
-
Page 15: Installation And Configuration
Installation and Configuration 3.1 Mounting to rack Take out the supplied 2 mounting brackets (for 19-inch rack) and 8 screws (for fixing the main unit and the mounting bracket), and fix the brackets to the main unit by tightening screws into 4 holes located at the sides. Then, mount this Switching Hub firmly to the rack using the supplied 4 screws (for 19-inch rack) or screws furnished at the rack. -
Page 16: Configuration Of Ip Address (Basic)
Installation and Configuration 3.2 Configuration of IP address (Basic) (1) Connect this Switching Hub and PC with a RJ45–DSub 9-pin console cable and start up the terminal emulator (ZEQUO assist Plus, etc.). (2) Pressing Enter key 3 times opens Login screen. Enter Login name and Password (the default is "manager"... - Page 17 Screen 1 Screen 2 Screen 3 Screen 4 Screen 5 * For the following, please see the PDF version Operating Instructions in CD-ROM. - Detailed configuration and management methods using the CLI. - Configuration and management method from ZEQUO assist Plus.
-
Page 18: Troubleshooting
Troubleshooting If you find any problem, please take the following steps to check. LED The POWER LED (Power) is not lit. Check if the power cord is disconnected. Please confirm that the power cord is securely connected to the power port. ...