Table of Contents
Advertisement
4.7.2. Link Aggregation
4.7.2.a. About Link Aggregation
Link aggregation is a function that can increase redundancy of network
paths and bandwidth between Switching Hubs by grouping multiple ports
to a trunk for connection.
In this Switching Hub, up to 8 ports can be assigned to 1 group, and 8
groups can be created.
When using both Link Aggregation and Access Control functions, assign a
practical physical port number to a port list of access control, not a logical
port created in Link Aggregation. For details, refer to 4.7.4.
Note: If port communication modes are mixed, Link Aggregation cannot be
configured. In addition, Link Aggregation and Internet Mansion
mode cannot be used simultaneously.
Note: Depending on number of ports in a group or the traffic condition,
traffic may not be assigned uniformly to all the ports.
Note: If you shutdown one of the ports where the Link Aggregation is
configured, this action shutdowns all the ports of the same group
member of the Link Aggregation.
125
Advertisement
Table of Contents
