Table of Contents
Advertisement
Screen Description
Port
Shows the port number.
Refresh
Shows the refresh interval of the screen. (Factory default setting: 300 seconds)
Elapsed Time Since
Shows the time elapsed since resetting counters.
Reset
Counter Name
Shows each counter name.
Total
Shows each counter value.
Avg./s
Shows the average per second of each counter.
Available commands are listed below.
N
Show the values of the next port.
Press "N." The screen shows the counter values of the next port. Disabled in Port 16.
P
Show the values of the previous port.
Press "P." The screen shows the counter values of the previous port. Disabled in Port 1.
S
Switch a target port.
Press "S." The command prompt changes to "Select Port number>." Enter the port number you
wish to display.
F
Set the counter refresh mode.
Press "F." The command prompt changes to "1 for start to refresh, 2 for set refresh rate." Press
"1" to stop auto-refresh. Press "2" to change the refresh interval.
If you press "2," the command prompt changes to "Input refresh time>." Enter an integer between
5 and 600 (seconds).
R
Switch to display counter values since resetting counters.
Press "R" to reset the counter values. Elapsed Time Since System Reset becomes 0.
U
Set the screen refresh mode.
Press "U" to display counters since booting.
Q
Return to the previous menu.
130
Advertisement
Table of Contents
