Table of Contents
Advertisement
Indicates that download of configuration file from TFTP server was successful.
Configuration file upload
Indicates that upload of configuration file to TFTP server was successful.
Failure: Reload system default-config!
Indicates that the system was booted with factory default setting due to failure in reading
configuration.
Firmware upgrade via CLI!
Indicates that the firmware version was upgraded via CLI command interface.
Reboot the system!
Indicates that the Switching Hub was rebooted.
System Cold Start.
Indicates that the power of the Switching Hub was turned on.
System MAC address found: MAC ADDRESS
Indicates the MAC address of this Switching Hub.
Write configuration to primary file success.
Indicates that configuration was successfully saved.
TELNET
Login failure(IP:IP ADDRESS).
Indicates that the login operation was executed via Telnet, but failed.
Login from telnet. (IP : IP ADDRESS)
Indicates that the login operation was executed via Telnet, and was successful.
info
Logout by user(IP: IP ADDRESS).
Indicates that connection via Telnet was terminated by user.
Logout due to time out(IP:IP ADDRESS).
Indicates that connection via Telnet was terminated due to timeout.
VLAN
err
Port add failed(vlan_id=A, port_id=B).
Indicates that addition of PVID has failed. "A" indicates VLAN ID, and "B" indicates port
number.
Port delete failed(vlan_id=A, port_id=B).
Indicates that deletion of PVID has failed. "A" indicates VLAN ID, and "B" indicates port
number.
PVID set failed(vlan_id=A, port_id=B).
Indicates that configuration of PVID has failed. "A" indicates VLAN ID, and "B" indicates
port number.
VLAN entry allocate failed.
Indicates that allocation of VLAN entry has failed.
VLAN X create failed.
Indicates that creation of VLAN ID "X" has failed.
VLAN X destory failed.
146
Advertisement
Table of Contents
