Table of Contents
Advertisement
Available commands are listed below.
I
Set an in-profile index number.
Press "I." The command prompt changes to "Enter in-profile action index>." Enter an index
number with a value of 1 to 65535.
D
Deny/permit packets.
Press "D." The command prompt changes to "Select Deny/Permit (1-2)>." Press "1" to
deny packets. Press "2" to permit them.
S
Set a DSCP value to be marked.
Press "S." The command prompt changes to "Enter DSCP value>." Enter a DSCP value of
0 to 63.
P
Set a precedence value to be marked.
Press "P." The command prompt changes to "Enter ToS precedence value>." Enter a precedence
value of 0 to 7.
C
Set a CoS value to be marked.
Press "C." The command prompt changes to "Enter CoS value>." Enter a CoS value of 0
to 7.
A
Apply the setting. If not applied here, the setting will be discarded.
Q
Return to the previous menu.
100
Advertisement
Table of Contents
