Available commands are listed below.
N
Show the next page.
Press "N." The screen shows the next page.
P
Show the previous page.
Press "P." The screen shows the previous page.
V
Configure PVID settings.
Press "V." The command prompt changes to "Enter port number>." Enter a port number you wish
to configure. Then, the command prompt changes to "Enter PVID for port #>." Enter a PVID with
a value of 1 to 4094.
F
Set the type of received frame.
Press "F." The command prompt changes to "Enter port number>." Enter a port number you wish
to configure. Then, the command prompt changes to "Select port acceptable frame type (A/T)>."
Enter "A" to receive all frames. Enter "T" to receive only tagged frames.
Q
Return to the previous menu.
Note:
In this Switching Hub, multiple VLANs can be assigned to one port. If a new VLAN
is created, a port will belong to both existing VLAN and new VLAN. To divide the
domains, make sure to delete the port from the existing VLAN.
82