4.6.3.a. SNMP Management Configuration
On the SNMP Configuration Menu, pressing "M" opens the SNMP Management Configuration
Menu, as shown in Fig. 4-6-5. On this screen, you can configure the SNMP manager settings.
PN28160/PN28160A Local Management System
SNMP Configuration -> SNMP Management Configuration Menu
SNMP Manager List:
No.
Status
---- --------
1
Enabled
2
Enabled
3
Disabled
4
Disabled
5
Disabled
6
Disabled
7
Disabled
8
Disabled
9
Disabled
10
Disabled
-------------------------------- <COMMAND> -----------------------------------
Set Manager [S]tatus
Set Manager P[r]ivilege
Command>
Enter the character in square brackets to select option
Screen Description
SNMP Manager List:
Shows the current SNMP manager settings.
No.
Status
Privilege
IP Address
Community
Privilege
IP Address
-----------
---------------
Read-Only
0.0.0.0
Read-Write
0.0.0.0
Read-Only
0.0.0.0
Read-Only
0.0.0.0
Read-Only
0.0.0.0
Read-Only
0.0.0.0
Read-Only
0.0.0.0
Read-Only
0.0.0.0
Read-Only
0.0.0.0
Read-Only
0.0.0.0
Set Manager [I]P
Set Manager [C]ommunity
Fig. 4-6-5 SNMP Management Configuration
Shows the entry number on the SNMP Manager List.
Shows the SNMP manager status.
Enabled
Disabled
Shows the access privilege of the SNMP manager.
Read-Write
Read-Only
Shows the IP address of the SNMP manager.
Shows the current community name.
37
Community
----------------------------
public
private
[Q]uit to previous menu
The SNMP manager is enabled.
The SNMP manager is disabled.
Both the read and write operations are allowed.
Only the read operation is allowed.