Table of Contents
Advertisement
Available commands are listed below.
S
Set a VLAN ID (VLAN Identifier).
Press "S." The command prompt changes to "Enter VLAN ID>." Enter a VLAN ID.
N
Set a name of VLAN.
Press "N." The command prompt changes to "Enter VLAN name>." Enter a VLAN name within 30
one-byte characters.
P
Set a member of VLAN.
Press "P." The command prompt changes to "Enter egress port number>." Enter a port number you
wish to set. When entering multiple port numbers, delimit with comma with no space, or hyphenate the
continuous numbers.
A
Create VLAN.
Press "A" to apply the setting.
Q
Return to the previous menu.
Note:
After setting a VLAN, make sure to press "A" to apply the setting. If you press "Q"
without pressing "A," the setting will be discarded and VLAN will not be created.
78
Advertisement
Table of Contents
