Table of Contents
Advertisement
4.6.8.a. Adding or Deleting MAC Address
On the Forwarding Database Information Menu, pressing "S" opens the Static Address Table
Menu, as shown in Fig. 4-6-17. In this screen, you can add or delete a MAC address
statically.
PN28160/PN28160A Local Management System
Forwarding Database Menu -> Static Address Table Menu
MAC Address
-----------------
Database is empty!
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
[A]dd New Entry
Command>
Enter the character in square brackets to select option
Fig. 4-6-17 Adding or Deleting MAC Address
Screen Description
MAC Address
Shows the MAC address in MAC address table.
Port
Shows the port to which the MAC address belongs.
VLAN ID
Shows the VLAN ID to which the MAC address belongs.
Available commands are listed below.
N
Show the next page.
Press "N." The screen shows the next page.
P
Show the previous page.
Press "P." The screen shows the previous page.
A
Register an additional MAC address.
Press "A." The command prompt changes to "Enter MAC Address(xx:xx:xx:xx:xx:xx)." Enter a MAC
address to be added.
D
Delete a MAC address that has been registered.
Press "D." The command prompt changes to "Enter MAC Address(xx:xx:xx:xx:xx:xx)." Enter a MAC
address to be deleted.
Q
Return to the previous menu.
Port
VLAN ID
------
-------
[D]elete Entry
[Q]uit to previous menu
63
Advertisement
Table of Contents
