Table of Contents
Advertisement
Available commands are listed below.
D
Enable/disable the storm control for unknown unicast traffic.
Press "D." The command prompt changes to "Enter port number>." Enter a port number to designate.
Then, the command prompt changes to "Enable or Disable DLF storm control status>." Press "E"
to enable the unknown unicast control. Press "D" to disable it.
B
Enable/disable the storm control for broadcast traffic.
Press "B." The command prompt changes to "Enter port number>." Enter a port number to designate.
Then, the command prompt changes to "Enable or Disable broadcast storm control status (E/D)>."
Press "E" to enable the broadcast control. Press "D" to disable it.
M
Enable/disable the storm control for multicast traffic.
Press "M." The command prompt changes to "Enter port number>." Enter a port number to designate.
Then, the command prompt changes to "Enable or Disable multicast storm control status (E/D)>."
Press "E" to enable the multicast control. Press "D" to disable it.
T
Set the threshold number of packets (Packet Per Second).
Press "T." The command prompt changes to "Enter port number>." Enter a port number to designate.
Then, the command prompt changes to "Enter threshold value>." Enter the threshold number of packets
(packet per second) between 0 and 262143.
Q
Return to the previous menu.
115
Advertisement
Table of Contents
