Table of Contents
Advertisement
4.6.7.b. RADIUS Configuration
On the System Security Configuration Menu, pressing "R" opens the RADIUS Configuration
screen, as shown in Fig. 4-6-13. On this screen, you can configure access setting to RADIUS
server that is used in login authentication.
PN28160/PN28160A Local Management System
System Security Configuration -> RADIUS Configuration Menu
NAS ID: Nas1
Index Server IP address
----- ----------------- -------------------- ------------- ------------------
1
0.0.0.0
2
0.0.0.0
3
0.0.0.0
4
0.0.0.0
5
0.0.0.0
-------------------------------- <COMMAND> -----------------------------------
Set [N]AS ID
Set Server [I]P
Set Shared Se[c]ret
Set [R]esponse Time
Set [M]ax Retransmission
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
NAS ID:
Shows the authentication ID (NAS Identifier).
Server IP Address:
Shows the IP address of RADIUS server. 0.0.0.0 is displayed because no address is
set on shipment.
Shared Secret:
Shows the common key (Shared Secret) that is used in authentication. The same key
must be set between the server side and the client side. In general, the system manager
sets this common key. No common key is set at shipment.
Response Time:
Shows the maximum response time for authentication request to RADIUS server. The factory
default setting is 10 seconds.
Max
Shows the number of retransmission times for authentication request to RADIUS server.
Retransmission:
The factory default setting is 3 times.
Shared Secret
Fig. 4-6-13 RADIUS Configuration
57
Response Time Max Retransmission
10 Seconds
3
10 Seconds
3
10 Seconds
3
10 Seconds
3
10 Seconds
3
Advertisement
Table of Contents
