Panasonic PN28160A Operation Manual page 3

 Do not install this Switching Hub at the location with continuous vibration or strong
shock, or at the unstable location.
Deviation could lead to injury and/or equipment failure.
 Do not install any module other than the separately sold SFP module to SFP extension
slot.
Deviation could lead to fire, electric shock, and/or equipment failure.
 Do not connect any cable other than the separately sold console cable.
Deviation could lead to fire, electric shock, and/or equipment failure.
 Do not put this Switching Hub into fire.
Deviation could lead to explosion and/or fire.
 Do not use the supplied power cord for anything other than this product.
Deviation could lead to fire, electric shock, and/or equipment failure.
 Do not place this Switching Hub under direct sun light and or high temperature.
Deviation could lead to fire to high internal temperature and fire.
 Use the bundled power cord (AC 100 – 240V specifications).
Deviation could lead to electric shock, malfunction, and/or equipment failure.
 Unplug the power cord in case of equipment failure.
Deviation, such as keeping connected for a long time, could lead to fire.
 Connect this Switching Hub to ground.
Deviation could lead to electric shock, malfunction, and/or equipment failure.
 Connect the power cord firmly to the power port.
Deviation could lead to electric fire, shock, and/or malfunction.
 Unplug the power cord if the STATUS/ECO LED (Status/ECO mode) blinks in orange
(system fault).
Deviation, such as keeping connected for a long time, could lead to fire.
 When this Switching Hub is installed on wall surface, mount it firmly so as not to drop
down because of weight of the main body and connection cable.
Deviation, could lead to injury and/or equipment failure.
 Handle the Switching Hub carefully so that fingers or hands may not be damaged by
twisted pair port, SFP extension slot, console port, or power cord hook block.
WARNING
WARNING
CAUTION
3