4.9.7. Watch Dog Timer Menu
On the Switch Tools Configuration Menu, pressing "W" opens the Watch Dog Timer Menu,
as shown in Fig. 4-9-10. On this screen, you can enable/disable the Watch Dog Timer
function.
PN28160/PN28160A Local Management System
Switch Tools Configuration -> Watch Dog Timer Menu
Watch Dog Timer:
-------------------------------- <COMMAND> -----------------------------------
Set [W]atch Dog Timer
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
Watch Dog Timer
Available commands are listed below.
W
Enable/disable the Watch Dog Timer function.
Press "W." The command prompt changes to "Enable or Disable Watch Dog Timer(E/D)>." Press
"E" to enable the function. Press "D" to disable it.
Q
Return to the previous menu.
Disabled
Fig. 4-9-10 Watch Dog Timer Menu
Shows the status of the Watch Dog Timer function.
The factory default setting is "Disabled."
Enabled
The function is enabled.
Disabled
The function is disabled.
148