System Setup; Hours Meter - Panasonic AJ-PX5000G Operating Instructions Manual

Item
[COMPRESSION Selects how to compress video when recording.
MODE]
[NORMAL]
[DARK]

[SYSTEM SETUP]

Item
[SETUP(7.5%)] Switches the setup.
[ON]
[OFF]
[GPS] Configures built-in GPS settings.
[ON]
[OFF]
[P.OFF GPS DATA] Selects whether to retain the GPS location information when the camera is turned
off and to record the retained data when the camera is turned on next time until a
new positioning is performed.
[HOLD]
[CLEAR]
[P.OFF LCD DISPLAY] Selects whether to set the time code of window display or display the count when
the power is off.
[ON]
[OFF]

[HOURS METER]

Item
[OPERATION] Displays the total time the camera power was turned on.
[P.ON TIMES] Displays the total number of times the camera power was turned on.
[VERSION]
Item
[VERSION] Displays the versions of the camera. Move the cursor right and left to change
pages.
[VERSION]
[MODEL
NAME]
[SERIAL NO.]
[MAC
ADDRESS]
[UID]
[UPDATE]
Performs an update of the camera firmware. (Enabled only when there is a dedicated update file on the SD memory card.)
Chapter 7 Menu Operations — Menu list
Description of settings
Records in standard compression mode.
Records by reducing image distortions caused by compression
generated in portions of approx. 10IRE (70 mV) or darker.
Description of settings
Setup 7.5% is on.
Setup 7.5% is off.
Activates the GPS. Outputs the location information as a signal
to the <SDI OUT1> terminal or the <SDI OUT2> terminal, and
records it as clip metadata.
Turns off the GPS. Location information is neither output nor
recorded.
Retains and records data.
Clears the data at the time when the camera is turned off.
Records 0 (No-Info) when the camera is turned on next time
until a positioning is performed.
Sets and displays time code even when the power is off.
Settings and display on the display window are not available
while the power is off.
Description of settings
Description of settings
Displays the version (representative version) of all firmware in
the camera.
Displays the product name of the camera.
Displays the serial number of the camera.
Displays MAC address of the camera (Media Access Control
address).
Displays the unique ID of the camera.
– 178 –
Remark
f This setting is enabled when recording in
DVCPRO HD 720P mode.
are factory settings.
Remark
are factory settings.
Remark
are factory settings.
Remark
f Turn the jog dial button (or press the cursor
buttons Y/I) to display the list screen for each
firmware version.