Table of Contents
Advertisement
[SYSTEM SETUP] screen
Item
SYSTEM MODE
Sets the signal format of the camera.
[1080-59.94i], [1080-23.98PsF] (OP4), [1080-50i], [720-59.94P], [720-50P],
[480-59.94i], [576-50i]
f [TURN POWER OFF] is displayed when the setting is changed. Turn off the
power of the camera once, and turn it on again.
REC SIGNAL (OP2)
Selects the input signal. The [SDI IN] item can be selected when the HD/SD SDI
input board (extra-cost option) is installed.
[CAMERA]
[SDI IN]
f It is always set to [CAMERA] when the power is turned on.
REC FORMAT
Selects the recording codec, and shooting and recording modes.
r When [SYSTEM MODE] is [1080-59.94i]
[AVC-I100/60i],
[AVC-I100/30PN],
[AVC-I100/24PN]
[AVC-I50/60i],
[AVC-I50/30PN],
[AVC-I50/24PN]
[DVCPROHD/60i] Recorded using the DVCPRO HD codec. Shooting mode can
r When [SYSTEM MODE] is [720-59.94P]
[AVC-I100/60P],
[AVC-I100/30PN],
[AVC-I100/24PN]
[AVC-I50/60P],
[AVC-I50/30PN],
[AVC-I50/24PN]
[DVCPROHD/60P],
[DVCPROHD/30PN],
[DVCPROHD/24PN]
r When [SYSTEM MODE] is [480-59.94i]
[DVCPRO50/60i],
[DVCPRO/60i],
[DV/60i]
r When [SYSTEM MODE] is [1080-23.98PsF] (*OP4)
[AVC-I100/24PN] Recorded using the AVC-I 100 codec. 24PN (native recording)
[AVC-I50/24PN] Recorded using the AVC-I 50 codec. 24PN (native recording) is
REC FORMAT
r When [SYSTEM MODE] is [1080-50i]
[AVC-I100/50i],
[AVC-I100/25PN]
[AVC-I50/50i],
[AVC-I50/25PN]
[DVCPROHD/50i] Recorded using the DVCPRO HD codec. Shooting mode can
r When [SYSTEM MODE] is [720-50P]
[AVC-I100/50P],
[AVC-I100/25PN]
[AVC-I50/50P],
[AVC-I50/25PN]
[DVCPROHD/50P],
[DVCPROHD/25PN]
r When [SYSTEM MODE] is [576-50i]
[DVCPRO50/50i],
[DVCPRO/50i],
[DV/50i]
Chapter 7 Menu Operations — Menu list
Description of settings
Records camera shooting signals of the camera.
Records input signals to <SDI OUT/IN (OP)> terminal.
Recorded using the AVC-I 100 codec. 60i, 30PN (native
recording), and 24PN (native recording) are used for shooting
and recording, respectively.
Recorded using the AVC-I 50 codec. 60i, 30PN (native
recording), and 24PN (native recording) are used for shooting
and recording, respectively.
be set at the [CAMERA MODE] item. Recording is fixed to 60i.
Recorded using the AVC-I 100 codec. 60i, 30PN (native
recording), and 24PN (native recording) are used for shooting
and recording, respectively.
Recorded using the AVC-I 50 codec. 60i, 30PN (native
recording), and 24PN (native recording) are used for shooting
and recording, respectively.
Recorded using the DVCPRO HD codec. 60P, 30PN (native
recording), and 24PN (native recording) are used for shooting
and recording, respectively.
Recorded using the DVCPRO50, DVCPRO, and DV codec,
respectively. Shooting mode can be set with the [CAMERA
MODE] item. Recording is fixed to 60i.
is used for shooting and recording.
used for shooting and recording.
Recorded using the AVC-I 100 codec. 50i and 25PN (native
recording) are used for shooting and recording, respectively.
Recorded using the AVC-I 50 codec. 50i and 25PN (native
recording) are used for shooting and recording, respectively.
be set with the [CAMERA MODE] item. Recording is fixed to
50i.
Recorded using the AVC-I 100 codec. 50P and 25PN (native
recording) are used for shooting and recording, respectively.
Recorded using the AVC-I 50 codec. 50P and 25PN (native
recording) are used for shooting and recording, respectively.
Recorded using the DVCPRO HD codec. 50P and 25PN (native
recording) are used for shooting and recording, respectively.
Recorded using the DVCPRO50, DVCPRO, and DV codec,
respectively. Shooting mode can be set with the [CAMERA
MODE] item. Recording is fixed to 50i.
– 122 –
Remark
f This setting is not available in USB device mode.
f This setting is not available when clip connection
is underway with one-clip recording.
f The factory settings may differ depending on the
region.
(AG-HPX610P: [1080-59.94i], AG-HPX610EJ:
[1080-50i])
f When OP4 is not installed
The [1080-23.98PsF] setting item is grayed out
and cannot be selected.
f This item is not displayed when [SYSTEM MODE]
is [1080-23.98PsF].
f When [SDI IN] is selected, images are recorded
with 60i or 50i regardless of the [REC FORMAT]
setting.
f This setting is not available when clip connection
is underway with one-clip recording.
f When [REC SIGNAL] is [SDI IN], recording is
performed in a normal mode (60i or 60P) even if
the native recording is selected.
f This setting is not available in USB device mode.
f This setting is not available when clip connection
is underway with one-clip recording.
f When [REC SIGNAL] is [SDI IN], recording is
performed in a normal mode (50i or 50P) even if
the native recording is selected.
f This setting is not available in USB device mode.
f This setting is not available when clip connection
is underway with one-clip recording.
indicates factory setting values.
Advertisement
Table of Contents
