Panasonic AJ-PX5000G Operating Instructions Manual page 78

Chapter 4 Adjustments and Settings for Recording — Viewfinder status display
[D.ZOOM x2/x3/x4/OFF] Displays the digital zoom factor.
[ATW ON/OFF] Displays the operation status of automatic tracking white balance.
[ATW LOCK ON/OFF] Displays the lock status of automatic tracking white balance operation.
[AUD CH1/3] Displayed when the input signal to record to audio channel 1 or 3 is switched.
[AUD CH2/4] Displayed when the input signal to record to audio channel 2 or 4 is switched.
[REC SW] Displayed when the <USER> button is functioning as the <REC> switch.
[Y GET ON] Displayed when the [Y GET] function is [ON].
[RET SW] Displayed when the <USER> button is functioning as the <RET> switch.
[SLOT SEL] Displayed when the switch for switching the card to record to is set.
[PRE REC] Displayed when the pre-recording mode is switched.
[USB STORAGE/ Displayed when the USB operation status is switched.
DEVICE/OFF]
[DRS ON/OFF] Displays the operation status of the dynamic range stretcher.
[ASSIST ON/OFF] Displays the focus assist operation status.
[C.TEMP ON/OFF] Displays the status of the mode for changing the color temperature by the jog dial button.
[LCD B.L] Displayed when the brightness of the LCD monitor backlight is switched.
[SHOT MARK] Displayed when shot marks are added or deleted.
[TEXT MEMO] Displayed when a text memo is recorded.
[WFM] Displayed when the waveform monitor is switched.
[FBC ON/OFF] Displays the operation status of the flash band compensation function.
[EVF CLR] Displays the color status of the viewfinder.
Displayed when the slot of the media used for recording is switched to [P2] (P2 memory card slots 1/2) or [mP2] (microP2
[REC MEDIA]
memory card slots 3/4).
[CAM RET] Displayed when the button assigned with the camera return function is pressed.
[REC CHECK] Displayed when the button assigned with the recording check function is pressed.
8 Focus bar display
Displays the high-frequency component of the video after conversion to a graph at the bottom left of the viewfinder. For details, refer to "Focus assist
function" (page 86).
9 Digital zoom ratio display
Displays the digital zoom factor.
[DZx2] 2 times
[DZx3] 3 times
[DZx4] 4 times
10 Extender
[EX] Displayed when the lens extender is used.
11 Color temperature
Displays the color temperature assigned to <A>, <B>, and <PRST> of the <WHITE BAL> switch. (This is sometimes a memory
value at execution of automatic white balance and sometimes a menu setting value.)
[*.*K]
Not displayed when auto tracking white balance is performed.
12 Filter position
[1] to [4] Displays the position of the <ND FILTER> dial.
[A] to [D] Displays the position of the <CC FILTER> dial.
[−] (flashing) The filter position is not set to the specified position.
13 <WHITE BAL> switch position
[A] The <WHITE BAL> switch is set to <A>.
[B] The <WHITE BAL> switch is set to <B>.
[P] The <WHITE BAL> switch is set to <PRST>.
[T] The switch is set to [ATW]. Note, however, that this flashes when brightness and color are outside the operation range.
14 Dynamic range stretcher (DRS) function display
[DRS] Displayed when the image level in high-brightness areas is compressed and the dynamic range is stretched.
15 Incremental gain display
Displays the value when incremental gain is functioning.
[6 ↑]/[10 ↑]/[12↑]/[15↑]/[20↑]/[24↑]/[28↑]/[34↑]
16 Gain display
Displays the gain value of the image amplifier configured.
Displays the current gain value.
[**dB]
[AGC]
Displayed when auto gain control is active.
– 78 –