Menu List; [Paint]; Rb Gain Control; Rgb Black Control - Panasonic AJ-PX5000G Operating Instructions Manual

Menu list

[PAINT]

[RB GAIN CONTROL]

Item
[R GAIN AWB PRE] Sets the Rch gain when the <WHITE BAL> switch is on <PRST>.
[−200]...[0]...[200]
[B GAIN AWB PRE] Sets the Bch gain when the <WHITE BAL> switch is on <PRST>.
[−200]...[0]...[200]
[R GAIN AWB A] Sets the Rch gain when the <WHITE BAL> switch is on <A>.
[−200]...[0]...[200]
[B GAIN AWB A] Sets the Bch gain when the <WHITE BAL> switch is on <A>.
[−200]...[0]...[200]
[R GAIN AWB B] Sets the Rch gain when the <WHITE BAL> switch is on <B>.
[−200]...[0]...[200]
[B GAIN AWB B] Sets the Bch gain when the <WHITE BAL> switch is on <B>.
[−200]...[0]...[200]
[AWB A GAIN Sets the Rch gain and Bch gain when performing automatic white balance after
OFFSET] the <WHITE BAL> switch is on <A>.
[ON]
[OFF]
[AWB B GAIN Sets the Rch gain and Bch gain when performing automatic white balance after
OFFSET] the <WHITE BAL> switch is on <B>.
[ON]
[OFF]

[RGB BLACK CONTROL]

Item
[MASTER PED] Sets the master pedestal level.
[−200]...[16]...[200]
[R PEDESTAL] Sets the Rch pedestal level.
[−100]...[0]...[100]
[G PEDESTAL] Sets the Gch pedestal level.
[−100]...[0]...[100]
[B PEDESTAL] Sets the Bch pedestal level.
[−100]...[0]...[100]
[PEDESTAL OFFSET] Sets the Rch, Gch, and Bch pedestal levels after adjusting the automatic black
balance.
[ON]
[OFF]
[R FLARE] Adjusts the Rch flare level.
The adjusted value of this item is added to the flare adjusted value in the main
menu → [MAINTENANCE] → [LENS FILE ADJ].
[−100]...[0]...[100]
[G FLARE] Adjusts the Gch flare level.
The adjusted value of this item is added to the flare adjusted value in the main
menu → [MAINTENANCE] → [LENS FILE ADJ].
[−100]...[0]...[100]
[B FLARE] Adjusts the Bch flare level.
The adjusted value of this item is added to the flare adjusted value in the main
menu → [MAINTENANCE] → [LENS FILE ADJ].
[−100]...[0]...[100]
[MATRIX]
Item
[[S] L MATRIX TABLE] Selects the color correction table when the <GAIN> switch is on <L>.
[A], [B], [OFF]
[[S] M MATRIX Selects the color correction table when the <GAIN> switch is on <M>.
TABLE] [A], [B], [OFF]
[[S] H MATRIX TABLE] Selects the color correction table when the <GAIN> switch is on <H>.
[A], [B], [OFF]
Chapter 7 Menu Operations — Menu list
Description of settings
Keeps the values set for [R GAIN AWB A] and [B GAIN AWB A].
Sets the value of Rch gain and Bch gain to [0].
Keeps the values set for [R GAIN AWB B] and [B GAIN AWB B].
Sets the value of Rch gain and Bch gain to [0].
Description of settings
Keeps each of the values set for [R PEDESTAL], [G
PEDESTAL], and [B PEDESTAL].
Sets the pedestal level of Rch, Gch, and Bch to [0].
Description of settings
– 142 –
Remark
f Settings made through the menu are disabled
when the remote control unit and extension
control unit are connected. (Setting values are
displayed.)
are factory settings.
Remark
f Settings made through the menu are disabled
when the remote control unit and extension
control unit are connected. (Setting values are
displayed.)
are factory settings.
Remark
are factory settings.