Panasonic AJ-PX5000G Operating Instructions Manual page 168

[MIC/AUDIO]
Item
[VR SELECT] Selects which channel to assign to the <AUDIO LEVEL CH1/3>/<AUDIO LEVEL
CH2/4> and <F.AUDIO LEVEL> dials.
[CH1/2]
[CH3/4]
[FRONT VR Sets whether to enable the <F.AUDIO LEVEL> dial for input signals selected in
CH1(CH3)] audio CH1 (CH3).
[FRONT]
[W.L.]
[REAR]
[ALL]
[OFF]
[FRONT VR Sets whether to enable the <F.AUDIO LEVEL> dial for input signals selected in
CH2(CH4)] audio CH2 (CH4).
[FRONT]
[W.L.]
[REAR]
[ALL]
[OFF]
[AUTO LVL Selects whether to automatically adjust the level adjustment method for audio
CH3(CH1)] CH3 (CH1).
[ON]
[OFF]
[AUTO LVL Selects whether to automatically adjust the level adjustment method for audio
CH4(CH2)] CH4 (CH2).
[ON]
[OFF]
[LVL CONTROL Can be manually adjusted with this item when automatic level adjustment of audio
CH3(CH1)] CH3 (CH1) is [OFF].
[0]...[70]...[100]
Can be manually adjusted with this item when automatic level adjustment of audio
[LVL CONTROL
CH4(CH2)] CH4 (CH2) is [OFF].
[0]...[70]...[100]
[MIC LOWCUT CH1] Selects the microphone lowcut filter for input channel 1.
[FRONT]
[W.L.]
[REAR]
[OFF]
[MIC LOWCUT CH2] Selects the microphone lowcut filter for input channel 2.
[FRONT]
[W.L.]
[REAR]
[OFF]
[MIC LOWCUT CH3] Selects the microphone lowcut filter for input channel 3.
[FRONT]
[W.L.]
[REAR]
[OFF]
[MIC LOWCUT CH4] Selects the microphone lowcut filter for input channel 4.
[FRONT]
[W.L.]
[REAR]
[OFF]
Chapter 7 Menu Operations — Menu list
Description of settings
Assigns level adjustment of channels 1/2. Channels 3/4 can be
automatically adjusted or adjusted by [LVL CONTROL CH3] or
[LVL CONTROL CH4].
Assigns level adjustment of channels 3/4. Channels 1/2 can be
automatically adjusted or adjusted by [LVL CONTROL CH1] or
[LVL CONTROL CH2].
Enabled only when [FRONT] is selected.
Enabled only when wireless microphone receiver is selected.
Enabled only when [REAR] is selected.
Enabled when any input is selected.
Disabled regardless of the input selected. Recording levels do
not change even if the volume dial is turned.
Enabled only when [FRONT] is selected.
Enabled only when wireless microphone receiver is selected.
Enabled only when [REAR] is selected.
Enabled when any input is selected.
Disabled regardless of the input selected. Recording levels do
not change even if the volume dial is turned.
Automatic adjustment is enabled.
Automatic adjustment is disabled. Can be adjusted using [LVL
CONTROL CH3(CH1)] at this time.
Automatic adjustment is enabled.
Automatic adjustment is disabled. Can be adjusted using [LVL
CONTROL CH4(CH2)] at this time.
Works when the front microphone is selected.
Enabled only when wireless microphone receiver is selected.
Enabled only when the rear microphone is selected.
The microphone lowcut filter does not work for any input.
Works when the front microphone is selected.
Enabled only when wireless microphone receiver is selected.
Enabled only when the rear microphone is selected.
The microphone lowcut filter does not work for any input.
Works when the front microphone is selected.
Enabled only when wireless microphone receiver is selected.
Enabled only when the rear microphone is selected.
The microphone lowcut filter does not work for any input.
Works when the front microphone is selected.
Enabled only when wireless microphone receiver is selected.
Enabled only when the rear microphone is selected.
The microphone lowcut filter does not work for any input.
– 168 –
Remark
f When [CH3/4] is selected in [VR SELECT],
channels are also replaced for the following six
items.
- [FRONT VR CH1] → [FRONT VR CH3]
- [FRONT VR CH2] → [FRONT VR CH4]
- [AUTO LVL CH3]→[AUTO LVL CH1]
- [AUTO LVL CH4]→[AUTO LVL CH2]
- [LVL CONTROL CH3] → [LVL CONTROL CH1]
- [LVL CONTROL CH4] → [LVL CONTROL CH2]
For details, refer to "Adjusting the recording levels"
(page 63).
f The channel is replaced when [CH3/4] is selected
in [VR SELECT]. Setting values are inherited
between replaced channels.
f The channel is replaced when [CH3/4] is selected
in [VR SELECT]. Setting values are inherited
between replaced channels.
f The channel is replaced when [CH3/4] is selected
in [VR SELECT]. Setting values are inherited
between replaced channels.
f The channel is replaced when [CH3/4] is selected
in [VR SELECT]. Setting values are inherited
between replaced channels.
f The channel is replaced when [CH3/4] is selected
in [VR SELECT]. Setting values are inherited
between replaced channels.
f The channel is replaced when [CH3/4] is selected
in [VR SELECT]. Setting values are inherited
between replaced channels.
are factory settings.