Panasonic AJ-PX5000G Operating Instructions Manual page 71

r When the camera and external device are locked to the external time code generator, and the TC OUT output signal of the camera
is used for simultaneous recording
Reference video signal
TC OUT terminal
TCG
External time code generator
r When the camera and external devices are locked to the external time code generator and two or more cameras are connected in
a cascade configuration
Reference video signal
TC OUT terminal
TCG
External time
code generator
DAT
Device capable of recording
without delay
r When the external device is locked to the time code generator of the camera
Reference video signal
TC OUT terminal
TCG
Connect as required.
Chapter 4 Adjustments and Settings for Recording — Setting the time data
<TC IN> terminal
TC IN terminal
DAT
Device capable of recording
without delay
<HDMI OUT> terminal
<SDI OUT1> terminal
<SDI OUT2> terminal
<VIDEO OUT> terminal
<GENLOCK IN> or
<SDI IN> terminal
TC IN terminal
<TC OUT> terminal
<TC IN> terminal
1st camera
[TC OUTPUT REF] setting:
[TC IN]
<GENLOCK IN> or <SDI IN>
terminal
<TC OUT> terminal
<TC IN> terminal
[TC OUTPUT REF] setting:
[TC IN]
<GENLOCK IN> or <SDI IN> terminal
<TC OUT> terminal
[TC OUTPUT REF] setting:
[VIDEO OUT]
<GENLOCK IN> or
<SDI IN> terminal
<TC OUT> terminal
<TC IN> terminal
2nd camera onwards
[TC OUTPUT REF] setting:
[TC IN]
TC IN terminal
Device capable of recording without delay in
sync with TC IN input (DAT, etc.)
– 71 –
REF IN terminal
TC IN terminal
Recording device
HDMI IN terminal
SDI IN terminal
VIDEO IN terminal
<GENLOCK IN> or
<SDI IN> terminal
<TC OUT> terminal
<TC IN> terminal
DAT