[User Menu Sel]; [Option Menu]; System Setup - Panasonic AJ-PX5000G Operating Instructions Manual

@ NOTE
t If [LINE&FREQ] or [REC FORMAT] is changed, the set pre-recording time value (main menu → [REC/PB] → [REC FUNCTION] → [PRE REC TIME])
may also be changed accordingly. The range that can be set for pre-recording time differs depending on the settings in [LINE&FREQ] and [REC
FORMAT]. If the pre-recording time exceeds the limit that can be set after changing the setting in [LINE&FREQ] or [REC FORMAT], the maximum limit
value will be set.

[SYSTEM SETUP]

Item
[SETUP(7.5%)]
[GPS]
[P.OFF GPS DATA]
[P.OFF LCD DISPLAY]
[HOURS METER]
Item
[OPERATION]
[P.ON TIMES]
[VERSION]
Item
[VERSION]
[UPDATE]
Performs an update of the camera firmware. (Enabled only when there is a dedicated update file on the SD memory card.)

[USER MENU SEL]

This is a menu to select items to be displayed in [USER MENU]. For details, refer to "Setting [USER MENU]" (page 148) and "Setting items to [USER
MENU] and loading/reading the settings to a data file" (page 192).

[OPTION MENU]

[OPTION]
Item
[ENG SECURITY]
[FAN MODE]
Chapter 7 Menu Operations — Menu list
Switches the setup.
[ON]: Setup 7.5% is on.
[OFF]: Setup 7.5% is off.
f Factory setting: [ON]
Configures built-in GPS settings.
[ON]: Activates the GPS operation. Outputs the location information as a signal to the <SDI OUT1>
terminal or the <SDI OUT2> terminal, and records it as clip metadata.
[OFF]: Turns off the GPS. Location information is neither output nor recorded.
f Factory setting: [OFF]
Selects whether to retain the GPS location information when the camera is turned off and to record the
retained data when the camera is turned on next time until a new positioning is performed.
[HOLD]: Retains and records data.
[CLEAR]: Clears the data at the time when the camera is turned off. Records 0 (No-Info) when the camera
is turned on next time until a positioning is performed.
f Factory setting: [CLEAR]
Selects whether to set the time code of window display or display the count when the power is off.
[ON]: Sets and displays time code even when the power is off.
[OFF]: Settings and display on the display window are not available while the power is off.
f Factory setting: [ON]
Displays the total time the camera power was turned on.
Displays the total number of times the camera power was turned on.
Displays the versions of the camera. Move the cursor right and left to change pages.
[VERSION]: Displays the version (representative version) of all firmware in the camera.
[MODEL NAME]: Displays the product name of the camera.
[SERIAL NO.]: Displays the serial number of the camera.
[NETWORK ID]: Displays the Network ID of the camera.
[UID]: Displays the unique ID of the camera.
Turn the jog dial button (or press the cursor buttons Y/I) to display the list screen for each firmware
version.
Selects whether to place restrictions on opening and closing the menu screen.
[ON]: Disables opening of menu items other than [USER MENU]. To release, consult your dealer.
[OFF]: Opening and closing are not restricted.
f Factory setting: [OFF]
Sets the fan operation mode.
[AUTO]: If the camera internal temperature rises, the fan will automatically rotate.
[OFF]: The fan does not rotate at all times. The warning [FAN STOPPED] is displayed.
f Factory setting: [AUTO]
Once the power is turned off, this item is always set to [AUTO] the next time power is turned on. If
operation continues while the fan is stopped, the internal temperature of the camera rises and it may not
be able to record or playback normally. Normally, use the camera in [AUTO]
– 191 –
Description of settings
Description of settings
Description of settings
Description of settings