[Rec/Pb] - Panasonic AJ-PX5000G Operating Instructions Manual

Item
[PROPERTY DISP.] Sets simple properties item displayed on the left of the thumbnail when [SMALL] is
selected for [THUMBNAIL SIZE].
[USER CLIP
NAME]
[START TC]
[REC DATE]
[REC TIME]
[NUM. OF
AUDIO CH]
[AUDIO RATE]
[AUDIO BIT]
[CREATOR]
[SHOOTER]
[PLACE NAME] Displays the shooting location.
[PROGRAM
NAME]
[SCENE NO.]
[TAKE NO.]
[REPORTER]
[PURPOSE]
[OBJECT]
[START UB]
[REC RATE]
[LAST UP
DATE]
[LAST UP
PERSON]
[MANUFACTURER] Displays the equipment manufacturer name.
[SERIAL NO.]
[MODEL
NAME]
[ALTITUDE]
[LONGITUDE]
[LATITUDE]
[1ST TEXT
MEMO]
[THUMBNAIL
OFFSET]
[STORAGE COPY SETUP]
Item
[VERIFY] Sets whether to verify or not when exporting in USB storage mode.
[ON]
[OFF]

[REC/PB]

[REC FUNCTION]
Item
[RECORDING] Select the recording format.
[NORMAL]
[INTERVAL]
[ONE SHOT]
[LOOP]
[HOLD] Selects whether to hold [RECORDING] settings.
[ON]
[OFF]
Chapter 7 Menu Operations — Menu list
Description of settings
Displays user clip names.
Displays the start time code.
Displays the recording date.
Displays the record time.
Displays the number of audio channels.
Displays the audio sampling rate.
Displays the audio bitrate.
Displays the person who recorded the clip.
Displays the videographer.
Displays the program name.
Displays scene number.
Displays take number.
Displays the reporter.
Displays the purpose of shooting.
Displays the object of shooting.
Displays the start user bits.
Displays the recording frame rate.
Displays the date of last update.
Displays the last person who updated.
Displays the serial number.
Displays the model name.
Displays an altitude.
Displays a longitude.
Displays a latitude.
Displays the first text memo content.
Displays the thumbnail recording position.
Description of settings
Verifies.
Does not verify.
Description of settings
Performs standard recording.
Performs interval recording.
Performs one-shot recording.
Performs loop recording.
Holds.
Does not hold. It will always be [NORMAL] the next time that
power is turned on.
– 161 –
Remark
f A maximum of 6 items can be displayed at the
same time.
f When 6 items are already selected, all unchecked
items cannot be selected.
f You can change your item selection by
unchecking selected items.
f Items with underlines are selected in the factory
settings.
are factory settings.
Remark
f Valid for use in storing to type S format only.
are factory settings.
Remark
f Only [NORMAL] can be selected in the following
cases:
- When the main menu → [SYSTEM] → [SYSTEM
MODE] → [REC SIGNAL] is set to [SDI]
- When the main menu → [SYSTEM] → [SYSTEM
MODE] → [REC FORMAT] is set to [AVC-G50]
or [AVC-G25]
are factory settings.