[File] - Panasonic AJ-PX5000G Operating Instructions Manual

[FILE]

[FILE] menu cannot be operated in the following cases:
f While the thumbnail screen is displayed
Remedy: Press the <THUMBNAIL> button to close the thumbnail screen, and try the operations again.
f During playback
Remedy: Press the <STOP> button to stop playback, and try the operations again.
f When recording by linking to the previous clip is possible in one-clip recording mode (when [1*CLIP] is displayed at the bottom right in the viewfinder
and the LCD monitor)
Remedy: Close the menu once, and hold down the <STOP> button for approx. 2 seconds to end linking of clips, and then try the operation again.
f During standby in interval recording or one-shot recording
Remedy: Press the <STOP> button to end interval recording, and try the operation again.
[SETUP DATA (SD CARD)]
Item
[LOAD] Loads the file selected from the setup data file list saved to the SD memory card
to the camera.
The data selected in [SETUP DATA SELECT] is loaded.
[SAVE] Overwrites the current menu setting values in the camera to the file selected from
the existing file list saved to the SD memory card.
Data selected in [SETUP DATA SELECT] is saved.
[SAVE AS] Enters the current menu setting values of the camera to file name and title as a
new file and saves it to the SD memory card.
Data selected in [SETUP DATA SELECT] is saved.
[SETUP DATA SELECT]
Item
[SYSTEM] Handles the menu in the main menu → [SYSTEM].
[CAMERA ID] Handles the menu in the main menu → [CAMERA] → [CAMERA ID].
[USER MENU SEL] Handles the menu in the main menu → [USER MENU SEL].
[PAINT(LEVEL)] Handles the menu adjustment value in the main menu → [PAINT].
[PAINT([S]SELECT)] Handles the menu setting value (items with [S]) in the main menu → [PAINT].
[VF] Handles the menu in the main menu → [VF].
[CAMERA] Handles the menu in the main menu → [CAMERA].
[REC/PB] Handles the menu in the main menu → [REC/PB].
[CLIP]
Handles the menu setting value in the main menu → [CLIP].
[I/F SETUP] Handles the menu in the main menu → [I/F SETUP].
[MAINTENANCE]
Handles the menu setting value in the main menu → [MAINTENANCE].
[OPTION MENU] Handles [OPTION MENU].
[CAC FILE (SD CARD)]
Item
[LOAD] Selects the chromatic aberration compensation data file saved to the SD memory
card and loads to the camera.
Specifies the file number when saving chromatic aberration compensation data of
the SD memory card loaded in [LOAD] to the camera.
[DELETE] Selects and deletes the chromatic aberration compensation data file saved to the
SD memory card.
[LENS FILE]
Item
[LOAD] Selects the lens file saved to the camera memory, loads it and uses it as a setting
value for the current operation.
[SAVE] Specifies and saves the title and number of current lens setting values to the
memory of this camera.
[CLEAR ALL FILE] Clears and initializes all values saved to the lens file.
Chapter 7 Menu Operations — Menu list
Description of settings
Description of settings
Description of settings
Description of settings
– 174 –
Remark
are factory settings.
Remark
f Select menu items to save to/read from to SD
memory card in the main menu → [FILE] →
[SETUP DATA (SD CARD)].
f The factory settings are as follows:
- [SYSTEM], [CAMERA ID], [OPTION MENU] →
without [l]
- Other → [l] present
are factory settings.
Remark
are factory settings.
Remark
are factory settings.