Audio (Output) Function Section - Panasonic AJ-PX5000G Operating Instructions Manual

Audio (output) function section

5
4
1 <MONITOR> (volume adjustment) dial
Adjust the volume of the speaker and earphones.
2 <ALRAM> (alarm volume adjustment) dial
Adjust the volume of the alarm from the speaker and earphones.
When set to the minimum position, the alarm cannot be heard.
3 Speaker
During recording, EE audio can be monitored, and during playback, playback audio can be monitored.
The alarm is output in sync with flashing/lighting of the <WARNING> lamp or warning indicator.
Audio from the speaker automatically disappears when earphones are connected to the <PHONES> terminal.
4 Audio channel selector switch
Switch the audio channels output to the speaker, earphones, and <AUDIO OUT> terminal.
<CH1/2>
Outputs the signals of audio channels 1 and 2.
<CH3/4> Outputs the signals of audio channels 3 and 4.
The channel display of the audio level meter on the display window and viewfinder are also switched interlocked to operation of this switch.
5 <MONITOR SELECT> (audio selection) selector switch
Select audio output from the speaker, earphones and <AUDIO OUT> terminal interlocked with the audio channel selector switch.
<CH1/3> Outputs the signal of either audio channel 1 or audio channel 3.
Outputs either the stereo audio signals of audio channels 1 and 2 or the stereo audio signals of audio channels 3 and 4. Stereo audio
<ST>
signals can be changed to the MIX signals in the main menu → [I/F SETUP] → [MIC/AUDIO] → [MONITOR SELECT].
<CH2/4> Outputs the signal of either audio channel 2 or audio channel 4.
<MONITOR SELECT> (audio selection)
selector switch
<CH1/3>
<ST>
<CH2/4>
* [STEREO] or [MIX] can be switched to in the main menu → [I/F SETUP] → [MIC/AUDIO] → [MONITOR SELECT].
6 <PHONES> (earphones) terminal (mini jack)
This is the terminal for connecting the audio monitor earphones. (stereo)
Audio that is output is the same on both terminals (front side, rear side)
7 <AUDIO OUT> terminal
f Output audio signals recorded on audio channel 1/2 or 3/4.
f Select output signals by the <MONITOR SELECT> selector switch.
Chapter 2 Description of Parts — Audio (output) function section
1 2 3
6
<CH1/2>
Audio channel 1
Stereo output from audio channels 1 and 2*
Audio channel 2
6
7
Audio channel selector switch
– 19 –
<CH3/4>
Audio channel 3
Stereo output from audio channels 3 and 4*
Audio channel 4