Panasonic AJ-PX5000G Operating Instructions Manual page 79

Chapter 4 Adjustments and Settings for Recording — Viewfinder status display
17 System information and warning
[SYSTEM ERROR Displayed when an abnormality in internal microcomputer communication or the reference signal has occurred. From here on,
E-**] recording and playback are not possible. The error code is displayed on **. For details, refer to "Error code" (page 222).
[TURN POWER OFF
Displayed when operation is no longer possible after P2 card is removed during accessing of the P2 card, for example, during
E-**] recording/playback or formatting. The error code is displayed on **.
[TEMPORARY PAUSE Displayed when the reference signal is disrupted and recording is suspended during generator lock input, etc.
IRREGULAR SIG]
[EOM] Displayed when there is no space remaining on the P2 card.
[BOS]
Displayed when the playback position is at the beginning of all clips.
[EOS] Displayed when the playback position is at the end of all clips.
Displayed when recording to the P2 card is not possible, for example, immediately after power is turned on or the P2 card is
[CANNOT REC] inserted. Detailed information of the P2 card can be checked in the mode check [FUNCTION] screen. For details, refer to "Mode
check display" (page 83).
[CANNOT PLAY] Displayed when playback is not possible, for example, when there are no clips on the P2 card or the P2 card is not inserted.
[TEXT MEMO] Displayed when a text memo is recorded.
[TEXT MEMO INVALID] Displayed when a text memo could not be recorded.
[MARK ON/OFF] Displayed when shot marks are added or deleted. For details on shot marks, refer to "Shot mark recording function" (page 42).
[SHOT MARK INVALID] Displayed when shot marks cannot be added.
[UPDATING] Displayed when playback operation is not accepted during updating of the clip information for playback.
Displayed when the USB device mode is set. Flashes during migration through modes, and after migration through modes
[USB DEVICE] is completed, [CONNECTED] is displayed when communication is possible and [DISCONNECTED] is displayed when
communication is not possible.
Displayed when the USB storage mode is set. Flashes during migration through modes, and from then on, [CONNECTED]
[USB STORAGE] is displayed when the external hard disk is recognized successfully and [DISCONNECTED] is displayed when it cannot be
recognized.
[THUMBNAIL OPEN] Displayed during thumbnail operation.
[TC REGEN] Displayed when the <RET> button on the lens is pressed to regenerate to the time code of the last recorded clip to the P2 card.
Flashes when the <USER> button assigned with [SLOT SEL] is pressed and while switching processing of the recording slot on
[SLOT SELECT]
the P2 card is being executed.
[SLOT SELECT Displayed when the <USER> button assigned with [SLOT SEL] is pressed and switching processing of the recording slot on the
INVALID] P2 card is not possible.
Displayed when recording cannot be paused, if recording resumes during recording completion process. This warning disappears
[REC PAUSE INVALID]
when recording completion process ends, and recording can be paused.
For details on warnings, refer to "Warning information display" (page 222).
18 Time code display
[TCG 12:59:59:20] Displays the time code generator value.
[TCR 12:59:59:20] Displays the timecode reader value.
[VUBG AB CD EF 00] Displays the user's bit generator value.
([UBG AB CD EF 00])
[VUBR 12 34 56 78] Indicates the user's bit reader value.
([UBR 12 34 56 78])
[CTL −1:59:59:20] Displays the CTL counter value.
19 Audio input line and level meter display
Displays the selected channel and its audio level.
[----r----+]
[F] Displayed when the <AUDIO IN> switch is <FRONT>.
[W] Displayed when the <AUDIO IN> switch is <W.L.>.
[R] Displayed when the <AUDIO IN> switch is <REAR>.
20 Iris override display
Displays the compensation level when the iris overwrite is functioning.
[++] Aperture opens by about 1.
[+] Aperture opens by about 0.5.
[−−] Aperture closes by about 1.
[−] Aperture closes by about 0.5.
(No display) Reference state.
21 Super iris display
Displayed when super iris is active.
22 Iris, F value
[NC] Displayed when the lens cable is not connected.
[OPEN] Displayed when the lens aperture is open.
[F1.7] to [F16] Displays the lens aperture value.
[CLOSE] Displayed when the lens aperture is closed.
f Displayed when a lens with an aperture value display function is used. Also, flashes when the iris override is variable.
– 79 –