Panasonic AJ-PX5000G Operating Instructions Manual page 18

t When [ON] is not set in the main menu → [I/F SETUP] → [MIC/AUDIO] → [REAR MIC POWER], power is not supplied regardless of the switch
position.
8 <AUDIO IN CH1/3>, <AUDIO IN CH2/4> (audio input channel 1/3, 2/4) terminals (page 109)
Connect the audio equipment or the microphone.
9 <MIC IN> (microphone input) terminal (page 108)
f Connect the microphone (optional).
f The phantom microphone can also be used. To use this, set [ON] in the main menu → [I/F SETUP] → [MIC/AUDIO] → [FRONT MIC POWER].
When it is set to [ON] and a microphone is not connected, low-frequency noise may occur. This is not a problem when a microphone is connected.
Chapter 2 Description of Parts — Audio (input) function section
– 18 –