System Setup Screen - Panasonic AG-HPX370 Operating Instructions Manual

Item
V DETAIL FREQ Sets vertical detail.
THIN: Produces fine detail.
MID: Produces less detail and wider edging.
THICK: Produces even less detail and the widest
edging effect.
• Progressive recording made at THIN or MID cause
horizontal lines or oblique lines that are almost
horizontal to flicker when viewed on a normal monitor
TV (60i (50i): Interlace). THIN and MID settings will
produce higher resolution video than THICK when
shooting progressive footage that will later be edited.
NAME EDIT Edits the name of scene files selected using the
SCENE FILE dial.

SYSTEM SETUP screen

Item
SYSTEM MODE Specifies the signal format used by this camera.
1080-59.94i, 1080-50i, 720-59.94P, 720-50P,
480-59.94i, 576-50i
• When a setting is changed, the message "TURN
POWER OFF" appears. Then turn the power off and
turn it back on again.
REC SIGNAL Selects the input signal in the DVCPRO format.
CAMERA: Records the camera recording signal.
1394: Records signals input to the DVCPRO/DV
connector.
• This function is always set to CAMERA when the
power is turned on.
REC FORMAT Selects the recording codec as well as shooting and
recording modes.
(when SYSTEM MODE is set to 1080-59.94i)
AVC-I100/60i, AVC-I100/30PN,
AVC-I100/24PN: Uses the AVC-I 100 codec for
recording. Shooting and recording at 60i, 30PN (native
recording) and 24PN (native recording).
AVC-I 50/60i, AVC-I 50/30PN,
AVC-I 50/24PN: Uses the AVC-I 50 codec for
recording. Shooting and recording at 60i, 30PN (native
recording) and 24PN (native recording).
DVCPROHD/60i: Uses the DVCPRO HD codec
for recording. Use CAMERA MODE options to set
shooting mode. Recording is locked to 60i.
(When SYSTEM MODE is set to 1080-50i)
AVC-I100/50i, AVC-I100/25PN:
Uses the AVC-I 100 codec for recording. Shooting and
recording at 50i, 25PN (native recording).
AVC-I50/50i, AVC-I50/25PN:
Uses the AVC-I 50 codec for recording. Shooting and
recording at 50i, 25PN.
DVCPROHD/50i:
Uses the DVCPRO HD codec for recording. Use
CAMERA MODE options to set shooting mode.
Recording is locked to 50i.
(Continued on the next page)
Setting
Setting
Notes
Notes
• Not available in USB DEVICE mode.
• Not available when compiling to a clip
in one-clip recording mode.
• The default setting for the AG-
HPX371E is 1080-50i.
• Not available when the menu option
REC FORMAT is set to AVC-Intra or
DVCPRO HD during native recording.
• Not available when compiling to a clip
in one-clip recording mode.
• Not available when 1080i or 720P
is set in SYSTEM MODE and REC
SIGNAL is 1394.
• Not available in USB DEVICE mode.
• Not available when compiling to a clip
in one-clip recording mode.
____ indicates the factory setting
15