Panasonic AJ-PX5000G Operating Instructions Manual page 126

Modifying recorded clip metadata
1
Display the metadata details window for the clip to be modified on the clip properties screen.
2
Place the cursor on the item to be modified using the cursor buttons. (Fig. 1)
The item of the metadata that can be modified is shown as [CREATOR], etc.
3
Press the <SET> button.
Information about keyboard operation is the same as "Checking and modifying uploaded metadata" (page 123).
f The input window (soft keyboard) for modifying metadata is displayed. (Fig. 2)
f Enter characters with the keyboard to modify the metadata.
4
Press the [OK] button on the keyboard.
The modified metadata is written on the clip and the screen returns to the metadata details window.
@ NOTE
t To delete each item in [LOCATION] (shooting location data) of [SHOOT], the item cannot be deleted alone. By setting the [ALTITUDE] item to empty,
other [LONGITUDE] and [LATITUDE] items are collectively deleted.
t The metadata for a clip with the incomplete clip indicator
while all P2 cards are inserted.
t Any [MEMO] with 101 characters or more cannot be modified.
P2 card status display
r P2 card status display settings
You can select the P2 card status display from either remaining capacity or used capacity of the P2 card.
1
Press the <THUMBNAIL> button.
The thumbnail screen appears on the viewfinder screen.
2
Select either [REMAIN] (remaining capacity) or [USED] (used capacity) in the main menu → [CLIP] → [PROPERTY] → [REMAIN
SETUP].
r P2 card status display items
[REMAIN]
[USED]
Chapter 6 Thumbnail Operations for Clips — Thumbnail operations
Fig. 1
cannot be modified. For the clips recorded on multiple P2 cards, modify the metadata
Displays remaining capacity on the P2 card as the P2 card status display. (Factory setting)
Displays used memory capacity on the P2 card as the P2 card status display.
– 126 –
Fig. 2