Setting The Marker Display; Display Of Marker Confirmation Screen (Marker Select Function); Confirmation Of Return Video Signal In The Viewfinder - Panasonic AJ-PX5000G Operating Instructions Manual

Chapter 4 Adjustments and Settings for Recording — Viewfinder status display
Status for displaying messages
When the <OUTPUT>/<AUTO KNEE> selector switch is set to
<ON> or <OFF>
When the shutter speed/mode setting is changed
When white balance is adjusted
When black balance is adjusted
When the extender is selected
When the <USER> button is selected
When the marker select function is selected
When in the iris override mode
When the CAC lens is mounted or unmounted

Setting the marker display

Select the type and display of the center marker, safety zone marker, safety zone area, and frame marker. Select the display mode of each item in the
main menu → [VF] → [VF MARKER].

Display of marker confirmation screen (marker select function)

The screen for confirming the marker status of the camera can be displayed on the viewfinder screen.
Pushing the <MARKER SEL>/<MODE CHECK/MENU CANCEL> switch on the camera towards the <MKR> side switches between [A] marker display
→ [B] marker display → no display
With the following settings in advance, you can check the angle of view at 14:9 and 4:3 easily by this button, if necessary. As the [A] marker information,
set [14:9] in the main menu → [VF] → [VF MARKER] → [FRAME SIG], and as the [B] marker information, set [4:3] in [FRAME SIG].

Confirmation of return video signal in the viewfinder

The return video signal input to the <SDI IN> terminal can be viewed in the viewfinder while the <RET> button on the lens is held down. To activate this
function, select [CAM RET] in the main menu → [CAMERA] → [SW MODE] → [RET SW].
@ NOTE
t The HD-Y or VBS signals of the <GENLOCK IN> terminal cannot be viewed as return video signals.
[AUTO KNEE:ON] (or [OFF])
[SS:1/100]
(or [1/60], [1/120], [1/250], [1/500],
[1/1000], [1/2000], [HALF], [***.*d], [w1/**.*] or
[w***.*d])
Example) [AWB A OK 3.2 K]
Example) [ABB OK]
Example) [EXTENDER ON]
Example) [UM:S.GAIN 30dB]
Example) [MKR:A]
Example) [++F5.6]
Example) [CAC LENS DATA INVALID]
Type of marker
Center marker
The aspect ratio currently set at [FRAME SIG] is displayed.
– 85 –
Message
Safety zone
[DISP MODE] setting
[1] [2] [3]
—
l l
—
l l
—
l l
—
l l
— —
l
—
l l
— —
l
—
l l
—
l l