Panasonic AJ-PX5000G Operating Instructions Manual page 159

Item
[FREE CAP. OF Displays available space in a partition.
PARTITION]
Item
[REPOSITION] Selects a clip to be displayed on the thumbnail screen.
[ALL CLIP]
[SAME
FORMAT
CLIPS]
[SELECTED
CLIPS]
[MARKED
CLIPS]
[TEXT MEMO
CLIPS]
[SLOT CLIPS]
[DELETE] Deletes selected clips.
[FORMAT] When the [FORMAT] menu is selected, format the P2 card in the specified P2
card slot and the SD memory card in the specified SD memory card slot.
[SLOT 1], [SLOT 2], [SLOT 3], [SLOT 4], [SD CARD]
[FORMAT(STORAGE)] Formats a storage device connected to the <USB3.0> terminal (host) using the
specified system in USB storage mode.
[TYPE S]
[FAT]
[COPY] Copies the selected clip to a P2 card in any P2 card slot, a storage device, or FTP
server.
[SLOT 1], [SLOT 2], [SLOT 3], [SLOT 4], [SD CARD], [STORAGE], [FTP],
[FTP(PROXY)]
[EXPORT] Exports (writes) clips from the P2 card or SD memory card to a storage device or
FTP server by units of card.
[ALL SLOT]
[SLOT 1]
[SLOT 2]
[SLOT 3]
[SLOT 4]
[SD CARD]
[IMPORT] Imports (writes back) clips etc. from a storage device or FTP server to the P2 card
or SD memory card by units of card.
[SLOT 1], [SLOT 2], [SLOT 3], [SLOT 4], [SD CARD]
[REPAIR] Repairs a clip displayed in the defective clip indicator (yellow) occurring as a result
of sudden power loss during recording or other reasons.
[RE-CONNECT] If clips that were recorded over multiple P2 cards are not recognized as
consecutive clips and the incomplete clip indicator
function to restore the clips to the consecutive clips (the original combined clips).
[EXCH. THUMBNAIL] Changes the clip thumbnail to an image with any text memo. This can be
executed while the text memo clip is displayed.
Chapter 7 Menu Operations — Menu list
Description of settings
Description of settings
Displays all clips as thumbnails.
Displays only the clips recorded in the same format as the
system format as thumbnails.
Clips recorded in the same format means that each item of
[LINE&FREQ], [REC FORMAT], and [AUDIO SMPL RES] in
the main menu → [SYSTEM] → [SYSTEM MODE] matches the
current setting status.
Example) [1080-59.94i], [AVC-I100], [24BIT]
Displays only the clips selected with the <SET> button as
thumbnails. The thumbnails appear in selected order.
Displays only the clips with shot marks added as thumbnails.
Displayed only clips with text memo data attached as
thumbnails.
Displays only the clips of the selected slot as thumbnails.
Formats a storage device in the [TYPE S] format.
Formats a storage device in the [FAT] format.
Exports clips from the P2 card to a storage device.
Exports clips from the the SD memory card to FTP server.
– 159 –
f This item is displayed in storage explorer when in
USB storage mode ([TYPE S] storage only).
f To interrupt the deletion process, press the
<SHIFT> button + <EXIT> button, or the <SET>
button to cancel the operation. Once a clip is
deleted, it cannot be restored even if the deletion
process is aborted.
f When a CPS password is set, you can select
[NORMAL] (normal unencrypted format) or
[CPS(ENCRYPT)] (encrypted format).
f Data deleted as a result of formatting cannot be
restored. Always check the data before formatting.
f Enabled only for storage explorer, storage
thumbnail.
f Data deleted as a result of formatting cannot be
restored. Always check the data before formatting.
f Do not turn power off or remove the card during
copying. Doing so will result in defective clips. If
a defective clip is created, delete the clip before
copying it again.
f Combine incomplete clips before copying.
f Only [TYPE S] is enabled for the storage device.
f Only writes back to a card with a serial number
matching the original card serial number.
f This item is displayed only in storage explorer or
FTP explorer.
f Repair may be impossible, depending on how
it was damaged. When repair is impossible, a
yellow indicator is displayed.
f Incomplete clips are formed in the following
is displayed, use this cases:
- When clips recorded to multiple P2 cards are
- When clips recorded to multiple cards are
f Even if only some of the incomplete clips divided
into 3 or more are linked, the incomplete clip
indicator will stay on until all of the clips that
comprise the original clips are linked.
Remark
are factory settings.
Remark
copied separately to individual P2 cards.
copied separately to individual storage device
cards and then re-written to P2 cards.
are factory settings.