Panasonic AJ-PX5000G Operating Instructions Manual page 77

Chapter 4 Adjustments and Settings for Recording — Viewfinder status display
[AWB B ACTIVE] Displayed when automatic white balance is active on the <B> channel.
Displayed when automatic white balance has ended successfully on the <A> channel.
[AWB A OK *.*K]
Displayed when automatic white balance has ended successfully on the <B> channel.
[AWB B OK *.*K]
Displayed when automatic white balance operation is forcibly ended.
[AWB BREAK *.*K]
Displayed when automatic white balance operation is not ended successfully. The 2nd line displays that status.
[COLOR TEMP LOW]
[COLOR TEMP HIGH]
[AWB NG]
[LEVEL OVER]
[LOW LIGHT]
[TIME OVER]
[ATW MODE] Displayed when automatic white balance cannot be executed due to activation of auto tracking white balance.
Displayed when the <WHITE BAL> switch is set to <PRST> and automatic white balance operation cannot be executed.
[AWB PRESET *.*K]
Displayed when automatic white balance operation cannot be executed. The 2nd line displays that status.
[AWB UNABLE]
[S.GAIN MODE]
[CHECK FILTER] Prompts re-confirmation of the filter switching dial position when the power is turned on and automatic white balance is active.
[ABB ACTIVE] Displayed when automatic black balance operation is active.
[ABB OK] Displayed when automatic black balance operation is ended successfully.
[ABB BREAK] Displayed when automatic black balance operation is forcibly ended.
[ABB NG] Displayed when automatic black balance operation is not ended successfully.
Displayed when black shading operation is accepted by holding down the <AUTO W/B BAL> switch during automatic black
[B-SHD READY]
balance operation.
[B-SHD ACTIVE] Displayed when black shading operation is active.
[B-SHD OK] Displayed when black shading operation is ended.
[B-SHD BREAK] Displayed when black shading operation is forcibly ended.
[B-SHD NG] Displayed when black shading operation is not ended successfully.
(Switch selection display)
Displayed when the <WHITE BAL> switch is switched. One of [A]/[B]/[PRST] is displayed at [#].
[ATW MODE]
[WHITE:#]
[*.*K]
Displayed when the <OUTPUT>/<AUTO KNEE> selector switch where [ON] or [OFF] is assigned in the main menu →
[AUTO KNEE:ON/OFF]
[CAMERA] → [SW MODE] → [AUTO KNEE SW] is set to <ON>/<OFF>.
Displayed when the <OUTPUT>/<AUTO KNEE> selector switch where [DRS] is assigned in the main menu → [CAMERA] →
[DRS:ON/OFF]
[SW MODE] → [AUTO KNEE SW] is set to <ON>/<OFF>.
Displayed when gain is switched by the <GAIN> switch or <USER> button. When digital super gain is active, that value is
[GAIN:**dB+**↑]
displayed at the same time.
When the shutter speed is switched, that value is displayed.
[SS:1/****] or
[***.*deg]
Displayed when syncro scan is selected for the shutter speed.
[SS: w 1/****]
or[w***.*d]
[CC:**** **K] Displayed when the <CC FILTER> dial position is switched.
Displayed when the <ND FILTER> dial position is switched.
[ND:*]
[EXTENDER:ON/OFF] Displays the status of the lens extender.
Displayed when the iris override compensation value is altered.
[IRIS:**F*.*]
(Drop in brightness warning display)
[LOW LIGHT] Displayed when brightness has dropped.
(Flash band compensation warning display)
[FBC OFF!]
Displayed when a flash band is detected while flash band compensation is off.
[SHUTTER&FBC ON!] Displayed when the <SHUTTER> switch is <ON> and flash band compensation is set to on.
7 <USER> button assignment information
[UM] Indicates the <USER MAIN> button.
[U1] Indicates the <USER1> button.
[U2] Indicates the <USER2> button.
[U3] Indicates the <SHOT MARK> button.
[U4] Indicates the <TEXT MEMO> button.
[RET] Indicates the <RET> button.
[INHIBIT] Displayed when the <USER> button is not operated.
Displays the selected super gain.
[S.GAIN **dB/OFF]
Displays the selected digital super gain.
[DS.GAIN **↑/OFF]
[S.IRIS ON/OFF] Displays the super iris operation status.
[I.OVR ON/OFF] Displays the iris override operation status.
[S.BLK −**/OFF] Displays the super black operation status. During operation, the setting value is also displayed.
[B.GAMMA ON/OFF] Displays the operation status of black gamma (black level tone compensation).
Warns that the color temperature is too low.
Warns that the color temperature is too high.
Warns that the brightness is too high.
Warns that the brightness is too low.
Warns that processing could not be executed within the operation time.
Displayed when super gain is active.
Displayed when automatic tracking white balance operation is set.
Displays the currently set color temperature.
– 77 –