Selecting Thumbnails; Selecting Clips - Panasonic AJ-PX5000G Operating Instructions Manual

Selecting thumbnails

Multiple thumbnails can be randomly selected on the thumbnail screen.
a: <THUMBNAIL> button
b: <EXIT> button
c: awsq cursor buttons
r<SET> button
d: <MENU> button
e: <SHIFT> button

Selecting clips

You can select multiple clips randomly.
1
Use the cursor buttons to move the cursor over the desired clip.
2
Press the <SET> button.
A light blue frame and are displayed on the clip where the cursor is put. This indicates that it is selected.
3
To select additional clips, repeat steps 1 to 2.
It is possible to display only the selected clips on the thumbnail screen for playback.
@ NOTE
t While holding down the <SHIFT> button, use the cursor buttons (`/{) to move the cursor to the first or last clip.
t After selecting a clip, move the cursor to another clip and press the <SHIFT> button + <SET> button to select all clips from the previously selected clip
to the cursor position.
t As clips are selected, the number of selected clips displayed on the lower right corner of the screen changes according to the selection.
Deselecting clips
1
Move the cursor to the selected clip and press the <SET> button.
This deselects the clip.
@ NOTE
t While holding down the <SHIFT> button, press the <EXIT> button to deselect all the clips at once.
Chapter 6 Thumbnail Operations for Clips — Thumbnail operations
a b c d e
– 116 –