System Setup Screen - Panasonic AG-HPX250 Operating Instructions Manual

SYSTEM SETUP screen

Item
SYSTEM MODE Specifies the signal format used by this camera-recorder.
1080-59.94i, 1080-50i, 720-59.94P, 720-50P, 480-59.94i,
576-50i
Factory setting: 1080-59.94i (only for AG-HPX250P)
Factory setting: 1080-50i (only for AG-HPX250EN)
• When a setting is changed, the message "TURN
POWER OFF" appears. Then turn the power off and
turn it back on again.
REC SIGNAL Selects the input signal in the DVCPRO format.
CAMERA:
Records the camera-recorder recording signal.
1394:
Records signals input to the DVCPRO/DV connector.
• This function is always set to CAMERA when the power
is turned on.
REC FORMAT Selects the recording codec as well as shooting and
recording modes.
■
When SYSTEM MODE is set to 1080-59.94i
AVC-I100/60i, AVC-I100/30PN, AVC-I100/24PN:
Uses the AVC-I 100 codec for recording. Shooting and
recording at 60i, 30PN (native recording) and 24PN
(native recording).
AVC-I 50/60i, AVC-I 50/30PN, AVC-I 50/24PN:
Uses the AVC-I 50 codec for recording. Shooting and
recording at 60i, 30PN (native recording) and 24PN
(native recording).
DVCPROHD/60i:
Uses the DVCPRO HD codec for recording. Use CAMERA
MODE options to set shooting mode. Recording is locked
to 60i.
■
When SYSTEM MODE is set to 1080-50i
AVC-I100/50i, AVC-I100/25PN:
Uses the AVC-I 100 codec for recording. Shooting and
recording at 50i, 25PN (native recording) and 24PN
(native recording).
AVC-I 50/50i, AVC-I 50/25PN:
Uses the AVC-I 50 codec for recording. Shooting and
recording at 50i, 25PN (native recording) and 24PN
(native recording).
DVCPROHD/50i:
Uses the DVCPRO HD codec for recording. Use CAMERA
MODE options to set shooting mode. Recording is locked
to 50i.
___indicates the factory setting.
Setting Notes
• Not available when compiling
to a clip in one-clip recording
mode.
• Not available when the menu
option REC FORMAT is set
to AVC-Intra or DVCPROHD
during native recording.
• Not available when compiling
to a clip in one-clip recording
mode.
• Not available when 1080i or
720P is set in SYSTEM MODE
and REC SIGNAL is 1394.
• Not available when compiling
to a clip in one-clip recording
mode.
135