Saving and loading setup files
Specified menu items can be saved to SD memory cards and loaded to the camera.
There are two operations for saving to SD memory card: [SAVE] overwriting an existing file and [SAVE AS] creating a new file.
Overwriting a setup file on SD memory card
Select the type of menu to write beforehand in the main menu → [FILE] → [SETUP DATA SELECT].
1
Select [SAVE] in the main menu → [FILE] → [SETUP DATA (SD CARD)], and press the jog dial button (or <SET> button).
The list of setup files currently saved on the SD memory card is displayed.
2
Select the file to overwrite from the list.
The title entry screen and keyboard are displayed.
3
Enter the desired characters with the keyboard. (Fig. 1)
4
Use the jog dial button (or cursor buttons `/{/Y/I) to select [OK], and press the jog dial button (or <SET> button).
The confirmation screen is displayed.
5
Select [YES], and press the jog dial button (or <SET> button).
The file is saved and the file list is updated. (Fig. 2)
For details on error messages if an error message is displayed, refer to "Warning/error displays in the thumbnail operation, menu operation, and
USB storage mode" (page 223).
Saving a new setup file on SD memory card
Select the type of menu to write beforehand in the main menu → [FILE] → [SETUP DATA SELECT].
1
Select [SAVE AS] in the main menu → [FILE] → [SETUP DATA (SD CARD)], and press the jog dial button (or <SET> button).
The file name entry screen and keyboard are displayed.
2
Enter the desired characters with the keyboard.
3
Use the jog dial button (or cursor buttons `/{/Y/I) to select [OK], and press the jog dial button (or <SET> button).
The confirmation screen is displayed.
4
Select [YES], and press the jog dial button (or <SET> button).
After the file name is set, the title entry screen and keyboard are displayed.
5
Enter the desired characters with the keyboard.
6
Use the jog dial button (or cursor buttons `/{/Y/I) to select [OK], and press the jog dial button (or <SET> button).
The confirmation screen is displayed.
7
Select [YES], and press the jog dial button (or <SET> button).
Saving of the title name begins.
8
When the completion message is displayed, press the jog dial button (or <SET> button).
For details on error messages if an error message is displayed, refer to "Warning/error displays in the thumbnail operation, menu operation, and
USB storage mode" (page 223).
@
NOTE
t Setup files saved on the camera cannot be used on other models.
t Setup files saved on other models cannot be used on the camera.
Chapter 4 Adjustments and Settings for Recording — Handling setting data
Fig. 1
– 93 –
Fig. 2