Panasonic AJ-PX5000G Operating Instructions Manual page 102

@ NOTE
t When both the battery and the external DC power supply are connected, the power supply from the external DC power supply has priority. The battery
may be removed while using the external DC power supply.
t When using an external DC power supply, always turn the power switch of the external DC power supply on before turning the <POWER> switch of
the camera <ON>. If the operations are performed in reverse, the camera may malfunction because the external DC power supply output voltage rises
too slowly.
t When power is supplied from the <DC IN> terminal, the light circuit does not function. The light circuit can be used only when power is supplied from
the Anton/Bauer battery plate.
t When connecting the battery to the <DC IN> terminal, set the battery type in the main menu → [I/F SETUP] → [BATTERY/P2CARD] → [EXT DC IN
SELECT]. However, in that case, % display is not possible for batteries with a battery level indicator function.
Chapter 5 Preparation — Power supply
DC IN
1
2
3
4
Manufacturer Parts No.: HA16RX-4P (SW1) (76) (Hirose Electric Co.)
– 102 –
GND
NC
NC
+12 V
Panasonic Part No.: K1AA104H0038