[Clip] - Panasonic AJ-PX5000G Operating Instructions Manual

[USER SW GAIN]
Item
[S.GAIN] Selects the gain to enable to the <SUPER GAIN> switch (<USER> button).
[30dB], [36dB], [42dB]
[DS.GAIN] Selects the accumulated gain to enable to the <DS.GAIN> switch (<USER>
button).
[6dB], [10dB], [12dB], [15dB], [20dB], [24dB], [28dB], [34dB]
[LENS/IRIS]
Item
[A.IRIS LEVEL] Sets the auto iris target value.
[0]...[50]...[100]
[A.IRIS PEAK/AVE] Sets the ratio included in the peak for auto iris standard.
Larger ratios correspond to a peak within the IRIS detection window, and smaller
ones correspond to average values within the IRIS detection window.
[0]...[30]...[100]
[A.IRIS WINDOW] Selects the auto iris detection window.
[NORM1]
[NORM2]
[CENTER]
[S.IRIS LEVEL] Sets the super iris (backlight compensation) target value.
[0]...[70]...[100]
[IRIS GAIN] Selects the IRIS GAIN adjustment side.
[CAM], [LENS]
[IRIS GAIN VALUE] Selects the [IRIS GAIN] adjustment value.
When [CAM] is selected in [IRIS GAIN], this setting is enabled.
[1]...[10]...[20]
[AGC]
Item
[AGC] Selects [ON]/[OFF] for [AGC] function that automatically adjusts camera gain.
[ON], [OFF]
[AGC LIMIT] Sets the maximum gain value during [AGC] operation.
[3dB], [6dB], [12dB], [18dB]
[AGC POINT] Sets the F value to switch control to [AGC] from auto iris during [AGC] operation.
[F5.6], [F4.0], [F2.8]

[CLIP]

[PROPERTY]
Item
[CLIP PROPERTY] Detailed clip information is displayed on the screen. Items can be individually
corrected. For details, refer to "Properties" (page 125).
[CARD STATUS] Displays the card status of a card slot. For details, refer to "Thumbnail screen"
(page 114).
[CPS PASSWORD] Sets the CPS encrypted password of the microP2 memory card.
[LOAD]
[SET]
[DELETE]
[SD CARD] Displays SD memory card information.
[REMAIN SETUP] Sets which is displayed, remaining capacity or used capacity, when P2 card
information is displayed.
[REMAIN]
[USED]
Chapter 7 Menu Operations — Menu list
Description of settings
Description of settings
Window that is near screen center.
Window that is near screen bottom.
Window that is a spot in the screen center.
Description of settings
Description of settings
Loads the CPS password from the SD memory card.
Enter the CPS password.
Deletes the password saved to the device, and disables
encrypted formats.
Displays remaining capacity.
Displays used capacity.
– 158 –
Remark
f Set to be valid/invalid per gain value. All gain
values are valid in the factory settings.
f Set to be valid/invalid per gain value. The gain
value of [20dB] or lower is valid in the factory
setting.
f When [DS.GAIN] function is operating, the shutter
mode is [OFF].
are factory settings.
Remark
f When using the lenses with extenders (such as
x2 and x0.8) sold prior to the FUJINON DIGI
POWER types, set to [LENS] with the extender
inserted, and operate IRIS correction control. If
set to [CAM], the IRIS control of the camera will
no longer function correctly.
are factory settings.
Remark
are factory settings.
Remark
are factory settings.