Mid Setting - Panasonic AJ-PX5000G Operating Instructions Manual

[MID SETTING]

Item
[[S] MASTER GAIN] Selects the master gain.
[−6dB], [−3dB], [0dB], [3dB], [6dB], [9dB], [12dB], [15dB]. [18dB], [21dB],
[24dB], [27dB], [30dB]
[H.DTL LEVEL] Sets the horizontal detail correction level.
[0]...[8]...[63]
[V.DTL LEVEL] Sets the vertical detail correction level.
[0]...[12]...[31]
[DTL CORING] Sets the detail noise removal level.
[0]...[8]...[60]
[H.DTL FREQ.] Selects the horizontal detail frequency.
[0]...[18]...[31]
[LEVEL DEPEND.] Sets [LEVEL DEPEND.].
Compresses the details of dark areas when Y detail is emphasized.
Details of bright areas are also compressed if the value is large.
[0], [1]...[5]
[MASTER GAMMA] Sets the master gamma in 0.01 steps.
[0.30]...[0.45]...[0.75]
[BLACK GAMMA] Sets the gamma curves of dark areas.
[−8]...[−1]
[OFF]
[1]...[8]
[B. GAMMA RANGE] Sets the maximum level of compression/expansion.
[1]
[2]
[3]
[[S] MATRIX TABLE] Selects the color collection table for the linear matrix.
[A], [B], [OFF]
[[S] COLOR Switches the 15-axis independent color correction on/off.
CORRECT] [ON], [OFF]
f When saving or reading setup files from an SD memory card, you can save items with an [S] and items without an [S] separately. Items with an [S] in
front of the item name are the targets for [PAINT([S]SELECT)] in the main menu → [FILE] → [SETUP DATA SELECT]. Items without an [S] are targets
for [PAINT(LEVEL)].
Chapter 7 Menu Operations — Menu list
Description of settings
Compresses the dark areas.
Standard state
Expands the dark areas.
About 20%
About 30%
About 40%
– 145 –
Remark
f [−6dB] in [[S] MASTER GAIN] cannot be selected
when [NORMAL] is set in main menu → [PAINT]
→ [[S] CAMERA SETTING] → [SHOOTING
MODE].
are factory settings.