Panasonic AJ-PX5000G Operating Instructions Manual page 134

Displaying the storage device clip thumbnails and the video monitor
Displaying thumbnails
You can display and manage clips saved in a storage device, as well as display the thumbnail screen for clips saved in a P2 card attached to the
camera.
1
Open the explorer screen.
Partitions or folders are displayed in a list.
2
Use the cursor buttons to place the cursor on the partition or folder you want to display on the thumbnail screen, and press the
<SET> button.
This displays the thumbnails of clips in the partition or folder. You can go back to the main explorer screen by clicking the <EXIT> button.
@ NOTE
t When target partitions are selected, you can display thumbnails in all partitions selected as targets by pressing <SHIFT> + <SET> buttons.
r Information display items
1 Clip information
Clip properties display
2 Storage device information
For [TYPE S]
[SERIAL]
[MODEL]
[SELECTED PART.]
[SELECTED PART. NO.]
[NO.]
[DATE]
[TIME]
[VERIFY]
[NAME]
[SIZE]
[USED]
[FREE CAP.]
For [FAT]
[SELECTED PART.]
[SELECTED PART. NO.]
Chapter 6 Thumbnail Operations for Clips — Thumbnail operations
1
2
P2 card serial number
P2 card model name
Displays a checkmark when a target partition is selected
List of selected partition numbers (only displayed when multiple partitions are selected)
Partition number
Partition record date
Partition record time
Verification settings and results during recording, [ON/FAILED]
f [ON/FAILED]: Verification performed. Items match.
f [ON/FINISHED]: Verification performed but no match found. (For [P2STORE], [−−] is displayed.)
f [OFF]: Verification not performed
Partition name defined by the user
Total capacity of the storage device
Used storage device capacity
Remaining storage device capacity
Displays a checkmark when a target partition is selected
List of selected folder numbers (only displayed when multiple folders are selected)
<SET>
<EXIT>
– 134 –