White Balance Mode - Panasonic AJ-PX5000G Operating Instructions Manual

Item
[D.ZOOM x2] Selects whether to enable 2x when digital zoom is assigned to the <USER> button
of the camera.
[ON], [OFF]
[D.ZOOM x3] Selects whether to enable 3x when digital zoom is assigned to the <USER> button
of the camera.
[ON], [OFF]
[D.ZOOM x4] Selects whether to enable 4x when digital zoom is assigned to the <USER> button
of the camera.
[ON], [OFF]
[FBC(SHUTTER ON)] Selects whether to permit the operation of the flash band compensation (FBC)
function when the <SHUTTER> switch is set to <ON>.
[ENABLE]
[DISABLE]
[RC CHECK SW] Selects camera operation when the remote control unit (AJ-RC10G) <CHECK/5>
button or the extension control unit <REC CHK> button is pressed.
[REC CHECK]
[PLAY]

[WHITE BALANCE MODE]

Item
[FILTER INH] Selects whether white balance memory (Ach or Bch) data is held or not held for
each CC filter.
[ON]
[OFF]
[SHOCKLESS AWB] When the position of the <WHITE BAL> switch is changed, set the time until when
the white balance starts at the changed position.
[FAST]
[NORMAL]
[SLOW1]
[SLOW2]
[SLOW3]
[OFF]
[AWB AREA] Switches the detection area that automatically adjusts white balance.
[25%]
[50%]
[90%]
[AWB B] Sets the function assigned to the <WHITE BAL> switch <B>.
[MEM]
[ATW]
[ATW SPEED] Switches the control speed of auto tracking white balance function.
[NORMAL], [SLOW], [FAST]
[TEMP PRE SEL SW] Selects whether to set the preset color temperature to be variable or to switch
between [3200K]/[5600K]. Right after the value is changed, the preset color
temperature is set to [3200K] (when the filter <A> is set).
[VAR]
[3.2K/5.6K]
[COLOR TEMP PRE] Sets color temperature when the <WHITE BAL> switch is in the <PRST> position.
Sets the preset color temperatures selected in [TEMP PRE SEL SW].
When [VAR] is selected for [TEMP PRE SEL SW]:
[< 2300K]...[3200K]...[> 15000K]
When [3.2K/5.6K]is selected for [TEMP PRE SEL SW]:[3200K], [5600K]
[AWB A TEMP] Sets color temperature when the <WHITE BAL> switch is in the <A> position.
If the white balance is automatically adjusted in the <A> position, the color
temperature at that time is recorded to the <WHITE BAL> switch <A> position.
[< 2300K]...[3200K]...[> 15000K]
[AWB B TEMP] Sets color temperature when the <WHITE BAL> switch is in the <B> position.
If the white balance is automatically adjusted in the <B> position, the color
temperature at that time is recorded to the <WHITE BAL> switch <B> position.
[< 2300K]...[3200K]...[> 15000K]
Chapter 7 Menu Operations — Menu list
Description of settings
Permits the operation of the flash band compensation function
with the <USER> button.
Forbids the operation of the flash band compensation function
with the <USER> button.
Recording check function is enabled.
Performs playback.
Description of settings
Holds Ach and Bch memory data (2 memories), regardless of
the CC filter.
Holds Ach and Bch memory data (8 memories), for each CC
filter.
Approx. 1 second
Approx. 2 seconds
Approx. 3 seconds
Approx. 10 seconds
Approx. 20 seconds
Moves instantly.
Detects 25% of the area near screen center.
Detects 50% of the area near screen center.
Detects 90% of the screen area.
Records setting values when white balance is automatically
adjusted, and operates using those values each time the
<WHITE BAL> switch is moved to <B>.
Assigns the auto tracking white balance function.
Switchable from [< 2300K] to [> 15000K].
Can be switched to [3200K] or [5600K].
– 157 –
Remark
are factory settings.
Remark
f The range of color temperature that can be set
differs depending on the position of the <CC
FILTER> dial. When a high color temperature is
set, sometimes the value does not change even if
the color temperature is changed.
are factory settings.