Panasonic AJ-PX5000G Operating Instructions Manual page 170

Item
[USB MODE] Turns operation of the mode selected in [USB MODE SELECT] [ON]/[OFF].
[ON], [OFF]
[NETWORK SEL] Sets the connection method when connecting the camera with an external device
(such as a computer) via network.
[WLAN]
[LAN]
[OFF]
[NETWORK FUNC] [HTTP
SERVER]
[USER
ACCOUNT]
[ACCOUNT
LIST]
[CLIENT SERVICE] [FTP SERVER
URL]
[LOGIN USER]
[LOGIN
PASSWORD]
[SSH]
[LAN PROPERTY] [MAC
ADDRESS]
[DHCP]
[IP ADDRESS]
[SUBNET
MASK]
[DEFAULT
GATEWAY]
[PRIMARY
DNS]
[SECONDARY
DNS]
[DHCP
SERVER]
Chapter 7 Menu Operations — Menu list
Description of settings
Connects via wireless LAN.
Connects via the <LAN> terminal.
Does not connect.
Configures the settings regarding the HTTP server function.
[BROWSE]
Enables the P2 browser function.
[BROWSE (+CTRL)]
Enables the HTTP server function, the start and stop of
recording from the terminal side, and preset control of time code
or user bits.
[DISABLE]
Disables the HTTP server function.
Sets the user account name.
Displays the currently set account name. Registering of new
accounts, deleting accounts, or changing password can also be
performed.
Sets the name or address of the destination server.
Sets the login user ID.
Sets the login password.
Sets when transferring files using SSH.
[ENABLE]
Uses SSH.
[DISABLE]
Does not use SSH.
Displays the MAC address of the <LAN> terminal on the
camera. (Cannot be changed.)
Sets whether to use automatic acquisition via DHCP.
(Mutually exclusive with [DHCP SERVER] setting)
[ENABLE]
Uses automatic acquisition.
[DISABLE]
Does not use automatic acquisition. Set [IP ADDRESS],
[SUBNET MASK], [DEFAULT GATEWAY], [PRIMARY DNS],
and [SECONDARY DNS].
Sets the IP address when [DISABLE] is selected in [DHCP].
([192.168.0.1])
Sets the subnet mask when [DISABLE] is selected in [DHCP].
([255.255.255.0])
Sets the default gateway when [DISABLE] is selected in
[DHCP]. ([192.168.0.254])
Sets the primary DNS server when [DISABLE] is selected in
[DHCP]. ([0.0.0.0])
Sets the secondary DNS server when [DISABLE] is selected in
[DHCP]. ([0.0.0.0])
Sets whether to use the DHCP SERVER function when
connected via wired LAN.
(Mutually exclusive with [DHCP] setting)
[ENABLE]
Uses the DHCP SERVER function.
[DISABLE]
Does not use the DHCP SERVER function.
– 170 –
Remark
f Once the power is turned off, it is always set to
[OFF] the next time power is turned on.
f When [DEVICE] is selected for [USB MODE
SELECT] and [USB MODE] is set to [ON] (in USB
device mode), the menu cannot be opened. In this
case, you can exit the USB device mode (return
to [OFF]) by pressing the <EXIT> mode.
For details, refer to "Connecting to a computer in
the USB device mode" (page 196).
f The setting cannot be changed while the
thumbnail screen is displayed.
are factory settings.