Panasonic AJ-PX5000G Operating Instructions Manual page 153

[MODE CHECK IND]
Item
[STATUS] Sets whether to display the status screen when the <MARKER SEL>/<MODE
CHECK/MENU CANCEL> switch is pushed to the <MCK/MCL> side.
[ON], [OFF]
[!LED] Sets whether to display the reason that the viewfinder lamp is illuminated when
the <MARKER SEL>/<MODE CHECK/MENU CANCEL> switch is pushed to the
<MCK/MCL> side.
The cause for the illuminated lamp is displayed by
[ON], [OFF]
[FUNCTION] Sets whether to display the [FUNCTION] screen when the <MARKER
SEL>/<MODE CHECK/MENU CANCEL> switch is pushed to the <MCK/MCL>
side.
[ON], [OFF]
[AUDIO] Sets whether to display the [AUDIO] screen when the <MARKER SEL>/<MODE
CHECK/MENU CANCEL> switch is pushed to the <MCK/MCL> side.
[ON], [OFF]
[CAC] Sets whether to display the [CAC] screen when the <MARKER SEL>/<MODE
CHECK/MENU CANCEL> switch is pushed to the <MCK/MCL> side.
[ON], [OFF]
[USER SW STATUS] Sets whether to display the function of each user switch or functions assigned to
other switches when the <MARKER SEL>/<MODE CHECK/MENU CANCEL>
switch is pushed to the <MCK/MCL> side.
[ON], [OFF]
[P.ON IND] Sets whether to display the status screen immediately after the camera is turned
on.
[ON], [OFF]
[!LED]
Item
[GAIN(0dB)] Sets whether to illuminate the [!] lamp on the viewfinder if the gain is other than
0 dB. (When the viewfinder has the [!] lamp)
[ON], [OFF]
[DS.GAIN] Sets whether to illuminate the [!] lamp on the viewfinder when [DS.GAIN]
(incremental gain) is functioning. (When the viewfinder has the [!] lamp)
[ON], [OFF]
[SHUTTER] Sets whether to illuminate the [!] lamp on the viewfinder if the electronic shutter is
working. (When the viewfinder has the [!] lamp)
[ON], [OFF]
[WHITE PRESET] Sets whether to illuminate the [!] lamp on the viewfinder if the <WHITE BAL>
switch is on <PRST>. (When the viewfinder has the [!] lamp)
[ON], [OFF]
[EXTENDER] Sets whether to illuminate the [!] lamp on the viewfinder if the lens extender is
working. (When the viewfinder has the [!] lamp)
[ON], [OFF]
[B.GAMMA] Sets whether to illuminate the [!] lamp on the viewfinder if the black gamma is
working. (When the viewfinder has the [!] lamp)
[ON], [OFF]
[MATRIX] Sets whether to illuminate the [!] lamp on the viewfinder if the color correction
table for linear matrix is selected. (When the viewfinder has the [!] lamp)
[ON], [OFF]
[COLOR Sets whether to illuminate the [!] lamp on the viewfinder if the 15-axis independent
CORRECTION] color correction is selected. (When the viewfinder has the [!] lamp)
[ON], [OFF]
[FILTER] Sets whether to illuminate the [!] lamp on the viewfinder for any setting
combination other than the <CC FILTER> dial set to<A> (<3200 K>) and the <ND
FILTER> dial set to <1> (<CLEAR>). (When the viewfinder has the [!] lamp)
[ON], [OFF]
[ATW] Sets whether to illuminate the [!] lamp on the viewfinder if automatic tracking white
balance is working. (When the viewfinder has the [!] lamp)
[ON], [OFF]
Chapter 7 Menu Operations — Menu list
Description of settings
!
.
Description of settings
– 153 –
Remark
f Even if [ON] is selected in this item, when
[STATUS] is [OFF], the status screen is not
displayed immediately after the camera is turned
on.
are factory settings.
Remark
are factory settings.