Display Modes And Setting Changes/Adjustment Result Messages - Panasonic AJ-PX5000G Operating Instructions Manual

Chapter 4 Adjustments and Settings for Recording — Viewfinder status display
[MIC POWER (MENU)]
[VR SELECT]
[LEVEL]
[F.VR]
[A.IN]
[METER]
[CAC INFO] screen
Displays the operation status or information of CAC.
[CAC CONT]
[CAC MODE]
[CONNECT LENS TYPE]
[SELECT FILE TITLE]
[CAC WARNING]
[USER SW] screen
Displays the assignment status of each <USER> button. For details, refer to "Assigning functions to <USER> buttons" (page 61).
[USER SW]
[OTHER ASSIGN]

Display modes and setting changes/adjustment result messages

You can select how messages are displayed in the viewfinder and how messages for notifying the details of changes to settings and adjustment results
are displayed. For example, whether to display or hide some items can be selected in the main menu → [VF] → [VF DISPLAY] → [DISP MODE]. For
details on operation methods, refer to "Setting menu basic operations" (page 140).
r Setting changes/adjustment result messages and [DISP MODE] settings
(l: Display, —: hide)
Status for displaying messages
When the <CC FILTER> dial/<ND FILTER> dial selection is
changed
When the gain setting is changed
When the <WHITE BAL> switch setting is changed
—
[FRONT]
[REAR]
—
[CH1/2/3/4]
[CH1/2/3/4]
[CH1/2/3/4]
[CH1/2/3/4]
Displays the operation status of CAC.
f [ON]: [ON] is set to in the main menu → [MAINTENANCE] → [CAC ADJ] → [CAC CONTROL], and CAC is active.
f [STOP]: [ON] is set to in the main menu → [MAINTENANCE] → [CAC ADJ] → [CAC CONTROL], however, CAC operation
stops under certain data or lens conditions.
f [OFF]: [OFF] is set to in the main menu → [MAINTENANCE] → [CAC ADJ] → [CAC CONTROL], and CAC is not active.
Displays the operation mode of CAC.
f [AUTO]: The CAC file is automatically selected.
Displays the lens ID of the currently connected digital lens.
Displays the title and the file version of the CAC file currently used in the operation. The CAC file can be set in the main menu
→ [MAINTENANCE] → [CAC ADJ].
Displays a warning when operation of CAC has stopped.
f [CAC LENS DATA INVALID]: This is displayed, for example, when the response data from the lens is not supported.
f [LENS INIT. NOT COMPLETED]: This is displayed, for example, when initialization of the lens cannot complete.
[USER MAIN (UM)]
[USER1 (U1)]
[USER2 (U2)]
[SHOT MARK (U3)]
[TEXT MEMO (U4)]
[RET SW]
[GAIN L]
[GAIN M]
[GAIN H]
[S.GAIN]
[DS.GAIN]
[FILTER:n]
([n] = [1], [2], [3], [4]), [m] ([m] = [A], [B], [C], [D])
[GAIN:ndB]
([n] = [−6], [−3], [0], [3], [6], [9], [12], [15], [18], [21], [24], [27],
[30])
[WHITE:n]
([n] = [A], [B], [PRE])
Displays the menu setting status of power supply to the microphone.
Displays the power supply status to the front microphone currently set in the main menu →
[I/F SETUP] → [MIC/AUDIO] → [FRONT MIC POWER] by [ON]/[OFF].
Displays whether to set supply of power to the microphone on the <AUDIO IN> terminal at
the rear in the main menu → [I/F SETUP] → [MIC/AUDIO] → [REAR MIC POWER].
f [OFF]: Power is not supplied to the microphone.
f [ON]: Power is supplied to the microphone when the <LINE>/<MIC> selector switch is set
to <MIC> and the microphone input power selector switch is set to <+48V>.
Displays which of [CH1/2] and [CH3/4] the audio level adjustment dial is to be set as
enabled to in the main menu → [I/F SETUP] → [MIC/AUDIO] → [VR SELECT].
Displays the recording level adjustment method currently selected on each channel.
f [VR]: Displayed when manual adjustment using the adjustment dial is set.
f [MENU]: Displayed when manual adjustment using [LVL CONTROL CH3(CH1)]/[LVL
CONTROL CH4(CH2)] is set in the main menu → [I/F SETUP] → [MIC/AUDIO].
f [AUTO]: Displayed when automatic adjustment is set.
Displays by [ON]/[OFF] whether the <F.AUDIO LEVEL> dial is enabled on the channel to
which [VR] (manual adjustment by adjustment dial) is displayed in [LEVEL].
Displays the input status of each channel by [FRONT] (front)/[REAR] (rear)/[W.L.]
(wireless).
Displays the recording level of each channel.
Displays the assignment to the <USER MAIN> button.
Displays the assignment to the <USER1> button.
Displays the assignment to the <USER2> button.
Displays the assignment to the <SHOT MARK> button.
Displays the assignment to the <TEXT MEMO> button.
Displays the assignment to the <RET> button on the lens.
Displays the gain value assigned to <L> of the <GAIN> switch.
Displays the gain value assigned to <M> of the <GAIN> switch.
Displays the gain value assigned to <H> of the <GAIN> switch.
Enumerates and displays the gain value assigned as super gain.
Enumerates and displays the gain value assigned as digital super gain.
Message
– 84 –
[DISP MODE] setting
[1] [2] [3]
— —
l
— —
l
— —
l