Field Service Ver. 1.0 Aug. 2006
[3]
[1]
5.3.20
Rack motor (M2)
[3]
5.3.21
Tray1 paper pick-up solenoid (SD1)
[1]
[2]
A00VF2C576DA
[1]
[2]
A00VF2C577DA
[2]
[4]
[3]
4139fs2030c1
4. Remove two screws [1], disconnect
the connector [2], and remove the
developing motor [3].
1. Remove the rack drive assy.
See the removal procedure steps 1 to 3
of "Developing motor" on p.62.
2. Remove two screws [1], disconnect
the connector [2], and remove the
rack motor [3].
1. Remove the high voltage unit.
See P.46
2. Remove one screw [1], unlock the
tab [2], and remove the wiring saddle
[3]. Then, remove the shield [4].
CAUTION
• When reinstalling the shield, make
sure that no part of the harness is
wedged in the mechanism.
5. Other
63