Installing An Sfp Or Sfp+ Transceiver; Table 3: Optional Transceivers; Figure 18: Inserting An Sfp Transceiver Into A Slot - Edge-Core ECS4510-52P Installation Manual

C 3
| Installing the Switch
HAPTER

Installing an SFP or SFP+ Transceiver

I
NSTALLING AN

Figure 18: Inserting an SFP Transceiver into a Slot

The switch supports the following optional transceivers:

Table 3: Optional Transceivers

SFP
1000BASE-SX (ET4201-SX)
1000BASE-LX (ET4201-LX)
1000BASE-ZX (ET4201-ZX)
To install an SFP or SFP+ transceiver, do the following:
1. Consider network and cabling requirements to select an appropriate
transceiver type. See
2. Insert the transceiver with the optical connector facing outward and the slot
connector facing down. Note that SFP and SFP+ transceivers are keyed so
they can only be installed in one orientation.
SFP SFP+ T
OR
10GBASE-SR (ET5402-SR)
10GBASE-LR (ET5402-LR)
10GBASE-ER (ET5402-ER)
"Connectivity Rules" on page
– 46 –
RANSCEIVER
SFP+
60.