Configure The Primary Network Interface; Figure 3-6 Appliance Product Registration Screen Example - Silicon Graphics NAS MIS Setup Manual

Configure the Primary Network Interface

007-5921-001
Figure 3-6
Appliance Product Registration Screen Example
To reconfigure the primary network interface, log in to the system console and execute the setup
appliance init command:
nmc: /$ setup appliance init
Next, you will be prompted to reconfigure the primary network interface. You may opt to choose
DHCP, if your environment supports it, as in
interface statically (you will need to specify the device's IP address, subnet mask, default gateway,
and DNS server addresses).
Tip: In most cases it is preferable to configure the appliance's primary IP interface statically.
Follow your general local area network administration guidelines.
Modular InfiniteStorage (MIS) NAS GUI Startup
Figure 3-7 on page 42. Or, you can set up the
41