Daylight Savings Setup - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Program 10 : System Configuration Setup
Level:
IN
Description
Use Program 10-24 : Daylight Savings Setup to set the options for daylight
savings. As the telephone system is used globally, these settings define when the
system should automatically adjust for daylight savings as it applies to the region in
which the system is installed.
Input Data
Programming Manual
Item
No.
01
Daylight Savings Mode
Enable (1) or disable (0) the system ability to
adjust the time for daylight savings/standard
time.
02 Time for Daylight Savings
Enter the time of day when the system should
adjust for daylight savings time.
03 Start Month (Summer Time)
Enter the month when the system should
adjust the time for daylight savings time
(01~12).
04 Start of Week
Enter the week of the month when the system
should adjust the time for daylight savings
time. The week will start on the day listed in
10-24-05.
05 Start of Week Day
Enter the day of the week when the system
should adjust the time for daylight savings time
(01 = Sunday, 02 = Monday, etc.).
06
End of Month
Enter the month when the system should
adjust the time for standard time (01~12).
07 End of Week
Enter the week of the month when the system
should adjust the time for standard time.
The week will start on the Day listed in
10-24-08.

10-24 : Daylight Savings Setup

Item Input Data
0 = Disable
1 = Enable
00:00~23:59
1~12
(Jan = 1, 2 = Feb, etc.)
0 = Last Week of Month
0~5
1~7
(Sun = 1, Mon = 2, etc.)
1~12
(Jan = 1, 2 = Feb, etc.)
0 = Last Week of Month
0~5
Issue 1.0
Default
1
02:00
3
2
1
11
1
2 - 39