NEC Univerge SV8100 Programming Manual page 270

Issue 1.0
Feature Cross Reference
2 - 230
Item
No.
07
External Paging
This option enables or disables a DISA or tie trunk caller ability to
use the telephone system External Paging.
08
Direct Trunk Access
This option enables or disables a DISA or tie trunk caller ability to
use Direct Trunk Access (Service Code
09
Forced Trunk Disconnect <Not for ISDN T-point>
This option enables or disables a tie trunk caller ability to use
Forced Trunk Disconnect (Service Code 3). This option is not
available to DISA callers.
10
Call Forward Setting by Remote via DISA
Enable or disable a DISA caller ability to use the Call Forward
service codes (Programs 11-11-01 ~ 11-11-05).
11
DISA/Tie Trunk Barge-In
This option enables or disables a DISA or tie trunk caller ability to
use the Barge-In feature.
12
Retrieve Park Hold
This option enables or disables a DISA or tie trunk caller ability to
retrieve a Park Hold call.
Conditions
None
Class of Service
Direct Inward System Access (DISA)
Tie Lines
Item
#
9).
Program 20 : System Option Setup
UNIVERGE SV8100
Default
Input
Data
COS 1~15
1
0 = Off
1 = On
0
0 = Off
1 = On
0 = Off 0
1 = On
0 = Off 0
1 = On
0 = Off 0
1 = On
0 = Off 1
1 = On