NEC Univerge SV8100 Programming Manual page 175

UNIVERGE SV8100
Programming Manual
Item
Item
No.
20
Block Outgoing
Caller ID
Allow (1) or prevent
(0) the system from
automatically blocking
outgoing Caller ID
information when a
user places a call. If
allowed (i.e. block,
enabled), the system
automatically inserts
the Caller ID block
code (defined in
14-01-21) before the
user dialed digits.
21
Caller ID Block Code
Enter the code, up to
8 digits, that should
be used as the Caller
ID Block Code. This
code is automatically
inserted before dialed
digits if Program
14-01-20 is set to 1.
22 Caller ID to Voice
Mail
Enable or disable the
system ability to send
the Caller ID digits
(Remote Log-On
Protocol) to voice
mail.
23 --- Not Used ---
24 Trunk-to-Trunk
Outgoing Caller ID
through Mode
Enable (1) or Disable
(0) the ability to send
the original Caller ID
through when the call
is Forward Off-
Premise.
Input Data
0 = Disable
(No)
1 = Enable
(Yes)
Dial (up to eight
digits)
0 = Disable
(No)
1 = Enable
(Yes)
0 = Disable
(No)
1 = Enable
(Yes)
Issue 1.0
Related
Default
Program
0 14-01-21
67 14-01-20
0
0
2 - 135