Copy Program By Port Number - NEC Univerge SV8100 Programming Manual

Issue 1.0
Level:
IN
Description
(This program is available only via telephone programming and not through PC
Programming).
Use Program 92-03 : Copy Program by Port Number to copy extension and the
data of each outside line.
Feature Cross Reference
None
2 - 762

92-03 : Copy Program by Port Number

Input Data
Item
No.
01 Source Number
02 Destination Number (From)
03
Destination Number (To)
Conditions
None
Program 92 : Copy Program
Item
Enter the port number from which the
data is to be copied.
Enter the first port number to which the
information is to be copied.
Enter the last port number to which the
information is to be copied. If the
information is only to be copied to one
port, enter the information entered in
the Destination Number (From) entry.
UNIVERGE SV8100
Input Data
Program 92 : Copy Program