Add/Delete Digit For E&M Tie Line - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use Program 34-06 : Add/Delete Digit for E&M Tie Line to set digits that the
system should add or delete for Tie Lines.
Input Data
Item
No.
01
02
Feature Cross Reference
Programming Manual
34-06 : Add/Delete Digit for E&M Tie Line
Delete Digit
Some Tie Line networks pass the location number and extension number to the
remote side. This program allows the system to ignore such numbers for a call.
If individual extension users do not want to receive an incoming call, they could
delete all digits including the extension number.
Add Digit
If a Tie Line network requires additional digits to reroute the call to a location, the
digits for the location can be added to the received digits.
Incoming Trunk Group Number
Item
Delete Digit
Additional Dial Digits
Conditions
None
Tie Lines
Program 34 : Tie Line Setup
Input Data
0~255 (255 = delete all digits)
#
Up to four digits (0~9, ,
001~100
)
Issue 1.0
Default
0
No Setting
2 - 397