Smdr Output Options - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use Program 35-02 : SMDR Output Options to set the SMDR (Station Message
Detail Recording) output options for each of the eight SMDR ports. Refer to the
following chart for a description of each option, its range and default setting.
Input Data
Programming Manual
Program 35 : SMDR Account Code Setup
SMDR Port Number
Item
No.
01
Toll Restricted Call
SMDR can include or exclude calls blocked by
Toll Restriction.
02
PBX Calls
When the system is behind a PBX, SMDR can
include all calls or just calls dialed using the
PBX trunk access code.
03 Trunk Number or Name
Select whether the system should display the
trunk name (0) or the number (1) on SMDR
reports.
If this option is set to 1, Program
35-02-14 must be set to 0.
04
Summary (Daily)
Set this option to (1) to have the SMDR report
provide a daily summary (at midnight every
night).
05
Summary (Weekly)
Set this option to (1) to have the SMDR report
provide a weekly summary (every Saturday at
midnight).
06 Summary (Monthly)
Set this option to (1) to have the SMDR report
provide a monthly summary (at midnight on the
last day of the month).

35-02 : SMDR Output Options

Item
1~8
Input Data Default
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Name
1 = Number
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
Issue 1.0
1
1
1
1
1
1
2 - 407